21113 27 Inch Spiral Antique Brass Table Lamp Set
Product Information: Table Lamp Set of 2
The Table Lamp Set of 2 comes with two table lamps and the
necessary hardware for assembly. The set includes two finials
(pre-assembled to harp), two harps, and two socket assemblies. The
lamps are designed to be connected to a fixture body and come with
a switch knob for easy operation. The lamps are compatible with a
MAX 16W 3-way medium base (E26) self-ballasted LED bulb and should
not exceed the recommended wattage.
Product Usage Instructions
- Important Safety Information: Before using the
Table Lamp Set of 2, please read the safety information provided in
the user manual carefully. It is important to follow all safety
precautions to avoid the risk of electric shock. - Preparation: Make sure the power cord is not
twisted before you start assembling the lamp. - Assembling the Socket Assembly: Connect the
socket assembly to the fixture body (B). Repeat this step for both
table lamps. - Installing the Light Bulb: Install a MAX 16W
3-way medium base (E26) self-ballasted LED bulb into the socket
assembly. Do not exceed the recommended wattage. - Assembling the Harp: Attach the harp to the
socket assembly by sliding it into place. Repeat this step for both
table lamps. - Assembling the Shade: Attach the shade to the
harp by placing it over the finial (H1) and securing it in place.
Repeat this step for both table lamps. Note: Remove the plastic
cover from the shade before using. - Assembling the Second Lamp: Repeat steps 3-5
to assemble the second table lamp. - Cleaning: To clean the table lamps, turn off
and unplug the lamps before wiping them down with a soft, dry
cloth. Do not use any cleaning solutions or abrasive materials on
the lamps. - Troubleshooting: If you experience any issues
with the Table Lamp Set of 2, please refer to the troubleshooting
section in the user manual for assistance.
USE AND CARE MANUAL
TABLE LAMP SET OF 2
A
B
H1 Finial (Pre-assembled to harp (H2)) 2 pcs
Hardware (Parts are not to scale)
H2 Harp 2 pcs
H3 Socket assembly
(connecting to fixture body (B))
2 pcs
THIS MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 1 of 4
IMPORTANT SAFETY INFORMATION
· This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids.
· Never cover the lamp with any object including cloth or paper as this is a fire hazard. · Do not handle the bulb immediately after the light is turned off as it will be hot. · This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
PREPARATION
· Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
ASSEMBLY
1 2 Assembling the socket assembly Installing the light bulb
· Pull the excess power cord through the base of the fixture body (B).
· Tighten the socket assembly (H3) onto the fixture body (B) securely.
NOTE: Do not twist the power cord.
· Install the light bulb (not provided) into the socket. Use one MAX 100 W 3-way medium base (E26) type “A” bulb (recommended).
NOTE: You can also use one MAX 16W 3-way medium base (E26) self-ballasted LED bulb. Do not exceed the recommended wattage.
H3 H3
B
Page 2 of 4
ASSEMBLY (continued)
3 Assembling the harp
· Insert the harp (H2) prongs into the saddle of the socket assembly (H3) and slide the retaining covers over joints to secure the harp.
H2
4 Assembling the shade
· Unscrew the finial (H1) from the harp (H2).
· Place the shade (A) onto the harp (H2) and secure with the finial (H1).
· Plug into the wall outlet, turn the switch clockwise and enjoy.
NOTE: Remove the plastic cover from the shade before using.
H1
A
H3
H2 H3
Switch knob
5 Assembling the second lamp
· Repeat steps 1 – 4 for the second lamp.
Page 3 of 4
CLEANING
· Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
· To clean the fixture, pull the plug from the wall outlet. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
TROUBLESHOOTING
· The light does not come on at all: a) Ensure the power supply is turned on. b) Ensure the cord is plugged into an outlet. c) Ensure the circuit breaker is set in the “ON” position.
· Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct.
Page 4 of 4
