Use and Care Manual for Table Lamp Set of 2

Product Information

The Table Lamp Set of 2 comes with the following hardware:

H1 Finial (Pre-assembled to harp (H2)) – 2 pcs
H2 Harp – 2 pcs
H3 Shade panel – 2 pcs
H4 Top ring – 2 pcs
H5 Bottom ring – 2 pcs

The product is equipped with a polarized plug that fits into an
outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. Do not use an extension cord unless the
plug can be fully inserted.

Product Usage Instructions

Preparation

Before assembly, read the important safety information in the
manual.

Shade Assembly

Assemble the shade by attaching H3 to H4 and H5.

Lamp Assembly

Install the upper light bulb, making sure not to exceed the
recommended wattage. You can also use one MAX 9W medium base (E26)
self-ballasted LED bulb.
Assemble the harp by attaching H2 to the lamp base.
Attach the shade to the lamp by sliding it onto the harp and
securing it with H1.
Repeat steps 1-3 for the second lamp.

Using the USB Port

The product has a USB port and a Type C port for charging
devices. Simply plug in the device to be charged.

Cleaning

Before cleaning, turn off and unplug the lamp. Use a soft, dry
cloth to wipe the lamp. Do not use liquid or abrasive cleaners.

Troubleshooting

If the lamp does not work, check that it is properly plugged in
and that the bulb is not burned out. If the problem persists,
contact a qualified electrician.

View Fullscreen

USE AND CARE MANUAL
TABLE LAMP SET OF 2

Hardware (Parts are not to scale)

H1 Finial (Pre-assembled
to harp (H2))
2 pcs

H2 Harp 2 pcs

H3 Shade panel 2 pcs

H4 Top ring 2 pcs

H5 Bottom ring 2 pcs

THIS MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 1 of 4

IMPORTANT SAFETY INFORMATION
· This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids.
· Never cover the lamp with any object including cloth or paper as this is a fire hazard. · Do not handle the bulb immediately after the light is turned off as it will be hot. · This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
PREPARATION
· Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.

SHADE ASSEMBLY
1 Assembling the shade

ASSEMBLY

· Place the shade panel (H3) and top ring (H4) and bottom ring (H5) from the box. · Attach the top ring (H4) and the bottom ring (H5) to clips on the shade panel (H3) securely into the clips. · Attach the shade panel (H3) together by velcro. · Repeat this step for the second shade. NOTE: Push and pull the shade panel (H3) to be tight before attach it together by velcro.

H3 H5
Page 2 of 4

ASSEMBLY (continued)

LAMP ASSEMBLY

1 Installing the upper light bulb
· Install the light bulb (not included) into the socket. Use one MAX 60W medium base (E26) type “A” bulb (recommended).
NOTE: You can also use one MAX 9W medium base (E26) self-ballasted LED bulb. Do not exceed the recommended wattage.

2 Assembling the harp
· Insert the harp (H2) prongs into the saddle of the fixture body (A) and slide the retaining covers over joints to secure the harp.

3 Assembling the shade

4 Assembling the second lamp

· Unscrew the finial (H1) from the harp (H2).
· Place the shade assembly onto the harp (H2) and secure with the finial (H1).
· Plug into the wall outlet, turn the switch clockwise and enjoy.

· Repeat steps 1 – 3 for the second lamp.

Switch knob

H2
A
Page 3 of 4

ASSEMBLY (continued)
LAMP ASSEMBLY
5 Using the USB port
· On the base there is a built in one USB port and one type C port for you to connect a charging cable (not included) (powers phones, tablets & more).
· The built-in USB port type A and type C rating: 5Vdc, 2.1A.

USB port

Type C port

CLEANING
· Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
· To clean the fixture, pull the plug from the wall outlet. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
TROUBLESHOOTING
· The light does not come on at all: a) Ensure the power supply is turned on. b) Ensure the cord is plugged into an outlet. c) Ensure the circuit breaker is set in the “ON” position.
· Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct.

Page 4 of 4