Edco Btwsg20 Wireless Earbuds And Charging Case Instructions

BTWSG20 Wireless Earbuds and Charging Case

Product Information:

• Product Name: BTWSG20
• Bluetooth Name: BTWSG20
• Bluetooth Version: 5.1
• Wireless Support Protocol: A2DP, AVRCP, HSP, HFP
• Earbud Battery Capacity: 30mAh * 2
• Charging Case Battery Capacity: 230mAh
• Charging Time: 1-2 Hours
• Charging Port: Type-C
• Frequency: 2.402-2.480GHZ
• Play Time: 3 Hours
• Speaker: 32
• Standby Time: 120 Hours

Product Usage Instructions:

1. Pairing: Turn on the Bluetooth function on
   your device and search for “BTWSG20” to pair with the earbuds.
2. Charging: Connect the charging case to a power
   source using the Type-C charging port. The earbuds and the charging
   case will start charging. The charging time is approximately 1-2
   hours.
3. Usage: Once the earbuds are fully charged,
   remove them from the charging case and insert them into your ears.
   Make sure to keep the earbuds away from magnets and speakers to
   avoid interference.
4. Cautions:
   • Do not crash, scratch, or warp the earbuds. Avoid throwing them
     into water.
   • Avoid extreme temperatures. The working condition should be
     between -10°C and 45°C.
   • Avoid moist environments that may cause corrosion.
5. Warnings:
   • Do not use the earbuds while they are charging. Use the
     original charger provided.
   • Do not open or throw the Li-polymer battery into fire.
   • Avoid connecting the earbuds with metal or short-circuiting
     them.
   • Avoid crashing the earbuds and keep them away from heating
     conditions (>60°C).

Package Contents:

• Bluetooth earbuds: 1 pair
• Charging case: 1
• Instruction book: 1

FCC Warning:

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.

ISEDC Radiation Exposure Statement:

This equipment complies with ISEDC RF radiation exposure limits
set forth for an uncontrolled environment. This transmitter must
not be co-located or operating in conjunction with any other
antenna or transmitter.

BTWSG20 UM
Power on/off: 1.Power On: take out the earbuds from charging case, auto power on or long touching the multi-function until the led in blue. 2.Power off: Put the earbuds back to charging case, auto power off and charging long, touching the multi-function until the led flashing in Red and lighting off Pairing: 1. Take out from charging case, earbuds auto paring, then search bluetooth match name”BTWSG20″ on your Cell phone, and pair to the Cell phone. 2. LED red blue light flash while pairing 3 .LED light off when pair to cell phone successfully. Answer/refuse call Answer call: short touch either earbud, touch again hang up call refuse call: long touch 2 seconds either earbuds. Play music: 1. Short touch either earbud to pause 2. Triple short touch “R” earbud to play next song, Triple short touch “L” earbud to play Previous song, Volume + to press R sides button 2 times,Volume ­ to press L sides button 2 times. 3. Long touch 2 seconds on either earbud to wake voice assistant. Charging: 1. Put the earbuds to the charging case, auto charging. 2. Inset the cable to Charge for the charging case, LED light on while charging, and light off , charging complete.
Earbuds and Charging Case Technical details: Pairing Bluetooth name : BTWSG20 Bluetooth Version: 5.1 Wireless Support Protocol: A2DP,AVRCP,HSP,HFP Earbud Battery capacity: 30mAh*2 Charging case Battery capacity: 230mAh Charging time: 1-2 Hour Charging Port: Type-C

Frequency:2.402-2.480GHZ Play Time: 3 hours Speaker: 32 Standby Time: 120 hrs
Attention: 1 Don’t crash, scratch, warping the earbuds, don’t throw to water. 2 Keep away from the magnet, speaker when using the earbuds 3 Avoid extreme temperature (working condition should be -100 -450) 4 Avoid moist environment
Warning: Don’t use the product while charging, use the original charger. Li-polymer battery cannot be open and throw to fire, cannot connect with metal or short circuit, cannot crash, avoid moist corrosion environment, avoid heating condition( >60)
Package list Bluetooth earbuds 1 pair Charging case *1 instruction book *1
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any interference received , including interference that may cause undesired operation .
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver . –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . –Consult the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.
IC Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le onjunc areil est conforme aux CNR d’l’ innovation, la science et le développement économique Canada licables aux areils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’areil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, onj si le brouillage est susceptible d’en compromettre le fonctionnement. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Tous les changements ou modifications non expressé ment approuvé e par le responsible de la conformité pourrait vider l’utilisateur est habilité à exploiter l’équipemen.
ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC exposition aux radiations: Cet équipement est conforme avec ISEDC les limites d’exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou émetteur. Cet appareil est conforme aux limitesd’exposition de rayonnement RF ISEDC établiespour un environne-ment non contrôlé. Cetémetteur ne doit pas être co-implanté oufonctionner en onjunction avec toute autreantenne ou transmetteur.