GD02R Mobile Digital Video Recorder
Product Information
- WCDMA bands: B2/4/5
- LTE bands: B2/4/5/12/13/14/66/71
This device is designed to operate on the WCDMA and LTE
networks. The supported WCDMA bands are B2, B4, and B5, while the
supported LTE bands are B2, B4, B5, B12, B13, B14, B66, and B71.
Please ensure that your network provider supports these bands for
compatibility.
It is important to note that any changes or modifications to
this device not explicitly approved by the manufacturer may void
your authority to operate this equipment. This device complies with
part 15 of the FCC Rules, which ensures that it does not cause
harmful interference and accepts any interference received, even if
it may cause undesired operation.
To comply with FCC radiation exposure limits, it is recommended
to install and operate this equipment with a minimum distance of
20cm between the radiator and your body. This precaution ensures
that the device operates within the specified safety limits.
Product Usage Instructions
- Ensure that your network provider supports the WCDMA and LTE
bands mentioned above. - Insert a compatible SIM card into the device.
- Power on the device by pressing and holding the power
button. - Wait for the device to establish a network connection. The
network indicator should show signal strength. - Once connected, you can use the device for various activities
such as making calls, sending messages, and accessing the
internet. - When not in use, it is recommended to keep the device at least
20cm away from your body to comply with FCC radiation exposure
limits. - To power off the device, press and hold the power button until
the device shuts down.
WCDMA:B2/4/5
LTE:B2/4/5/12/13/14/66/71
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
