Solos Airgo 1 Smart Glasses User Manual (+ PDF)

Contents hide

Before power on, please confirm that the left and right temples are attached to the AirGo glasses frame.
To power on AirGo, long press multi-function button for 2 seconds until Power Status voice prompt is heard, and it’s LED flashes in blue color . AirGo will reconnect to last paired phone automatically.
To power off AirGo , long press Multi-function button for 3 seconds until “Power Off” voice prompt is heard, and its LED will turn off.
AirGo will power off automatically if it is not put on for 3 minutes.

Long press multi-function button for 5 seconds to power on AirGo until its LED flashes in red/blue color and “Pairing” voice prompt is heard.
Turn on Bluetooth connectivity of your phone and put AirGo right next to your Phone
Open Bluetooth settings on your phone and select “Solos AirGo xxxx”. (“xxxx” is the unique device number)
AirGo’s LED will flash in blue color only after it is paired to your phone. It is ready for call and music now.

To play music , single tap on the frame.
To pause music , single tap on the frame.
When playing music, short press on multi-function button to play next track.
When playing music, short press on multi-function button TWICE consecutively to play previous track.

To accept a phone call , short press Multi-function button or slide backwards on right temple.
To reject a phone call , long press Multi-function button for 1 second or slide forwards on right temple
To end a phone call , short press Multi-function button

To accept the 2nd incoming phone call, short press Multi-function button. Current call will be ended.
To reject the 2nd incoming phone call, long press Multi-function button for 1 second

To increase volume level, slide backward on right temple during phone call or listen to music.
To decrease volume level, slide forward on right temple during phone call or listen to music.
Each slide backward or slide forward will adjust one step of the volume level.

Double tap on the frame to enable voice assistant of your phone (iOS or Android). After your double tap, you will hear the Voice assistant beep tone. You can start the voice command.
Double tap on the frame again to end voice assistant.

Connect pogo pin connector of the charging cable to AirGo charging port.
Plug USB connector of the charging cable to USB charger or laptop.
AirGo’s LED shows in red color during charging and blue color after fully charged. AirGo will be automatically power off when its under charging.
When disconnect pogo pin connector from AirGo, AirGo will power on and reconnect to last paired phone automatically.

AirGo mobile app uses AirGo smart glasses to provide AI Care, AI Coach and many other features.
AI Care takes care of your health with providing wellbeing features such as posture monitoring, posture/stretching exercise, personal reminders (drink water), etc.
AI Coach calculates and coaches your jogging activities.
AirGo mobile app is available for both iOS and Android