Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove Dirt Tank from Hand Vac
- Press button on top of Hand Vac to remove
- Press release button on front of Hand Vac to remove Dirt Tank
- Turn the Filter removal tab clockwise to operate the Clean-Turn feature (clears excess dirt & debris from filter dropping it into the dirt bin)
- Pull the Filter from top of Dirt Tank
- Empty debris from Dirt Tank
- Turn the Filter Assembly tab counter clockwise > Remove Mesh Filter Frame
- Clear debris from Filter & Filter Frame (machine should not be used without Filter & Filter Frame installed)
- Filter and Filter Frame can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
- Clear debris from Filter & Filter Frame (machine should not be used without Filter & Filter Frame installed)
- Return Filter into Filter Frame > Turn tab clockwise to lock > Insert into Dirt Tank
- Attach Dirt Tank to Hand Vac
- You should hear a click when Tank is secure
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
