57522 7 Piece Bi Metal Hole Saw Set
Product Information
This is a 7-piece bi-metal hole saw set with an adapter, clamp
washer, and pilot drill bit. The set includes saw sizes of 3/4, 1,
1-1/8, 1-1/4, and 1-1/2 inches. This product is designed for
cutting holes in various materials such as wood, plastic, and
metal.
Usage Instructions
Before using the product, make sure to read the owner’s manual
and safety instructions carefully. Keep the manual for future
reference. When unpacking, check the product for any damages or
missing parts and contact customer support if necessary.
Setup
- Wear heavy-duty work gloves and ANSI-approved safety goggles
during setup and whenever handling the Hole Saws. - Select the desired size Hole Saw.
- Thread Small Mandrel into Hole Saw securely.
- Use the Adapter to attach the Small Mandrel to medium size Hole
Saws (such as a 1-1/2 size.) Carefully thread Adapter with Clamp
Washer into Hole Saw and then thread the Small Mandrel through the
bottom so that it screws into the Adapter. - Adjust Small Mandrel position on Pilot Drill Bit. Tighten Set
Screw. - Open jaws of drill chuck (sold separately).
- Place the Pilot Drill Bit shaft completely into the chuck and
securely tighten the chuck.
Operation
- Set the Hole Saw on the workpiece.
- Press the drill’s trigger to turn it on.
- If the drill is a variable speed type, cut the workpiece slowly
until a circle groove is made in the workpiece. Then cut
faster. - When the hole is cut, release the trigger and wait for the Hole
Saw to come to a complete stop before removing it from the
workpiece.
Always wear ANSI-approved safety goggles and heavy-duty work
gloves during setup and use. Keep the product away from children
and store saw blades in a secure location. Use the correct size
arbor for the selected Hole Saw and verify that the drill’s chuck
is in good condition and fits securely. Do not use excessive
pressure when cutting a hole and inspect the product before every
use. Do not use if parts are loose or damaged. Read and adhere to
all safety warnings and operating instructions of the drill used
with the set.
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
23d
7 PIECE BI-METAL HOLE SAW SET
Visit our website at: http://www.harborfreight.com Email our technical support at: [email protected]
57522
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2023 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Specifications
Type
Bi-Metal
Piece Count 7
Saw Sizes 3/4″, 1″, 1-1/8″, 1-1/4″, 1-1/2″
Other Pieces
Adapter with Clamp Washer Pilot Drill Bit
IMPORTANT SAFETY INFORMATION
1. Wear ANSI-approved safety goggles and heavy-duty work gloves during setup and use.
2. Set contains sharp blades. Keep away from children.
3. Use correct size arbor for selected Hole Saw.
4. Verify drill’s chuck is in good condition and fits securely.
5. Do not use excessive pressure when cutting a hole.
6. Use as intended only; do not modify tools.
7. Inspect before every use; do not use if parts are loose or damaged.
8. Use both hands when drilling and keep blade at 90° to workpiece.
9. Store saw blades in secure location away from children.
10. Read and adhere to all safety warnings and operating instructions of drill used with Set.
11. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Page 2
For technical questions, please call 1-888-866-5797.
Item 57522
Setup
TO PREVENT INJURY: Wear heavy-duty work gloves and ANSI-approved safety goggles during setup and whenever handling the Hole Saws.
1. Select the desired size Hole Saw.
2. Thread Small Mandrel into Hole Saw securely.
3. Use the Adapter to attach the Small Mandrel to medium size Hole Saws (Such as a 1-1/2″ size.) Carefully thread Adapter with Clamp Washer into Hole Saw and then thread the Small Mandrel through the bottom so that it screws into the Adapter.
4. Adjust Small Mandrel position on Pilot Drill Bit. Tighten Set Screw.
5. Open jaws of drill chuck (sold separately).
6. Place the Pilot Drill Bit shaft completely into the chuck and securely tighten the chuck.
Hole Saw
Clamp Washer Adapter
Pilot Drill Bit
Small Mandrel
Set Screw
Item 57522
For technical questions, please call 1-888-866-5797.
Page 3
Operation
1. Holding the drill at 90° to the workpiece, 5. When finished, remove
set the Hole Saw on the workpiece.
the Hole Saw from drill’s chuck.
2. Press the drill’s trigger to turn it on.
3. If the drill is a variable speed type, cut the workpiece slowly until a circle groove is made in the workpiece. Then cut faster.
4. When the hole is cut, release the trigger and wait for the Hole Saw to come to a complete stop before removing it from the workpiece.
6. Remove Hole Saw from the Mandrel and clean off Hole Saw with a cloth.
7. Store the Hole Saws out of reach of children.
8. Replace the Pilot Drill Bit if dull or broken. Make sure the Bit is securely held in place after being reinstalled.
Note: Replacement parts are not available for this item.
Reference UPC 193175416773
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26677 Agoura Road · Calabasas, CA 91302 · 1-888-866-5797
