CMK1 Autark 10 Years Watch
Product Information
The AUTARK 10 YEARS watch is a timepiece designed and
manufactured by HORAGE SA. It features the CMK1 movement and comes
with a power reserve indicator, date window, and small seconds
hand. The watch also has a screw-down crown for added protection
against water damage. The watch is designed to be reliable and
long-lasting, with maintenance recommended to ensure its continued
precision and extended lifetime.
Product Usage Instructions
When setting the time on your AUTARK 10 YEARS watch, it is
important to move the hands clockwise to avoid movement defects. To
set the time, pull the crown at 3 o’clock to the second notch and
wind the crown backward. To set the date, pull the crown at 3
o’clock to the first notch and wind the crown forward. To wind the
watch, turn the crown forward when it is touching the case.
It is recommended to have your watch serviced by an experienced
watchmaker to ensure its continued precision and longevity. During
service, make sure that the seals are exchanged to maintain water
resistance and lubrication is applied to keep the watch running
smoothly.
AUTARK 10 YEARS
USER MANUAL
AUTARK 10 YEARS
2
Movement-CMK1
Dear Customer, Congratulation on your new AUTAK 10 YEARS watch, we hope you enjoy using it.
AUTARK 10 YEARS
3
Movement-CMK1
USEFUL INFORMATION
Attention: To avoid movement defects, generally, hands should be moved clockwise while setting the time.
In order to guarantee the reliability of your HORAGE watch we recommend you to follow some directions:
· Protect your watch from shocks and magnetic fields.
· The fine mechanism of your HORAGE watch should be examined and maintained from time to time.
· We recommend a revision and examination regarding the water resistance every three years (if often used in water, every two years). This should be done by an authorized HORAGE dealer.
· Your watch will appreciate it and an impeccable function will be guaranteed.
AUTARK 10 YEARS
4
Movement-CMK1
USEFUL INFORMATION
· Only diving watches are suited for swimming and diving. Your watch has been tested regarding the pressure indicated at the bottom of the case.
· Before use in water it needs to be checked whether the crown is pushed to the winding up position in order to guarantee the water resistance.
· The indicated water resistance is only valid for newly manufactured watches. The water resistance can be affected with time by shocks, chemical reactions with gasoline, adhesives, paint, cleaning spray etc. and by frequent turning of the crown.
· The watch automatically winds up by the movement of the wearer.
· To put the watch into operation it needs to be wound up by 10 or 15 revolutions via the crown.
5
AUTARK 10 YEARS
AUTARK 10 YEARS
6
Movement-CMK1
OVERVIEW
1 Hour Hand 2 Minute Hand 3 Small Seconds Hand 4 Power Reserve Indicator 5 Date Window 6 Screw Down Crown
AUTARK 10 YEARS
7
Movement-CMK1
1
2
6
3
4
5
AUTARK 10 YEARS
8
Movement-CMK1
01
2
Power Reserve
Power setting.
0 Crown at 3 o’clock touching the case, the crown can be wound forward to gain power.
AUTARK 10 YEARS
9
Movement-CMK1
01
2
Date setting.
Date
1 Pull the crown at 3 o’clock (first notch): wind the crown forward to set the date.
AUTARK 10 YEARS
10
Movement-CMK1
01
2
Time setting.
2 Pull the crown at 3 o’clock (second notch): wind the crown backward to set the time; the watch will start as soon as the crown is pushed back in.
AUTARK 10 YEARS
11
Movement-CMK1
MAINTENANCE
Service can be performed by every experienced watch maker.
Make sure that the seals are exchanged to keep water resistance intact as well as lubrication is applied during this service.
It’s not a must but your watch will like it and thank you with good precision and extended lifetime.
AUTARK 10 YEARS
Movement-CMK1
HORAGE SA Fuchsenried 10 2504 Biel/Bienne Switzerland
www.horage.com
HORAGE + Swiss Performance Watchmaking
