Martin Jerry Us-fc-01 Smart Fan-speed Control User Manual

User Manual ­ Smart Fan-Speed Control
Model: US-FC-01
Sep 2021

READ HERE FIRST !!!

1. The switch must work well manually after installation. If not, go back to the wiring step as below. Single Pole US-FC-C01 (click here)
2. The WiFi router should be 2.4G WiFi. CANNOT support 5G (802.11av).
   An a. If you are using the dual-band wifi router, please set a separate SSID for the 2.4G.
   b. If you are using google wifi, which you cannot set a name for 2.4G, please stay far enough from the wifi router until your phone indicates 2.4G wifi connected.

Video Demo: EZ mode for Wi-Fi Connection: https://www.youtube.com/watch?v=JGUM-pCfO7s

1. Download Smart Life App
   Confirm that you have downloaded the right Smart Life App (The same Logo as the right side). If not, download it from the links
   iPhone: https://itunes.apple.com/us/app/smart-life-smart-living/id1115101477?mt=8
   Android: https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_UShttp://smartapp.tuya.com/smartlife?from=singlemessage&isappinstalled=0
2. Set the Switch to Pairing Mode
   2.1. After wiring, you will see the 2. indicator flashes in RED on the switch. If not, press the 3. Wi-Fi Button.
3.  Pair the switch on App

If the above pairing method fails several times,
Please go to the AP mode mentioned incoming pages

Video Demo: AP Mode for Wi-Fi Connection
https://www.youtube.com/watch?v=dXEKoDysJCc

Step 1: Set the switch to AP mode

1. Press and hold the power button for 5-8s until the indicator blinks quickly.
2. Press and hold the power button for 5-8s until the indicator blinks slowly.

Step 2: Pair the switch on SmartLife App (AP mode)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

References

• ‎Smart Life - Smart Living on the App Store
• Smart Life - Smart Living - Apps on Google Play
• 7.WiFi connection - AP mode - YouTube
• 6.WiFi connection - EZ mode - YouTube