Bezgar Hq051 Remote Control Drone User Manual

HQ051 Remote Control Drone

Product Information:

• Product Name: REMOTE CONTROL DRONE
• Model: HQ051
• Manufacturer: SHANTOUSHI CHENGHAIQU XIONGMUWANJUSHANGHANG
• Address: NO.3-2, BLDG 4, NORTH OF THE XINXIN LU, XIMEN,
  CHENGHUA, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG, CHINA
  515800

Product Usage Instructions:

1. Ensure the drone is fully charged before use. Connect the
   included charging cable to the drone and a power source.
2. Place the drone on a flat surface and turn on the power switch
   located on the drone.
3. Take the remote control and turn it on by pressing the power
   button.
4. Ensure that the drone and remote control are paired by
   following the pairing instructions in the user manual.
5. Once paired, use the joystick on the remote control to control
   the movement of the drone. Push the joystick up to make the drone
   ascend, and pull it down to make it descend.
6. To make the drone move forward, push the joystick forward. To
   make it move backward, pull the joystick backward.
7. To rotate the drone, use the left and right controls on the
   remote control.
8. Make sure to fly the drone in an open area away from obstacles
   and people. Avoid flying in windy conditions.
9. If the drone starts losing control or the battery is running
   low, land it immediately to prevent accidents.
10. After use, turn off the power switch on both the drone and
    remote control.
11. Store the drone in a safe and dry place, away from direct
    sunlight and extreme temperatures.

APPEND MANUAL

Produce name: REMOTE CONTROL DRONE Model:HQ051 Manufacturer: SHANTOUSHI CHENGHAIQU XIONGMUWANJUSHANGHANG Address:NO.3-2,BLDG 4,NORTH OF THE XINXIN LU,XIMEN, CHENGHUA, CHENGHAI DISTRICT,SHANTOU CITY,GUANGDONG,CHINA 515800 NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.