Salus Thermostat Sensor Ts600 User Guide

Salus Thermostat Sensor Ts600 User Guide

SALUS Thermostat Sensor TS600 User Guide

SALUS Thermostat Sensor TS600 User Guide

Introduction

TS600 is a multi-functional device that can be configured to be a programmable room thermostat or a hot water timer built into a smart designed casing and it is compatible with the SALUS Smart Home system.

Product Compliance
This product complies with the essential requirements and other relevant provisions of Directives 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.saluslegal.com

SALUS Thermostat Sensor TS600 User Guide - Signal icon2405-2480MHz; <14dBm
SALUS Thermostat Sensor TS600 User Guide - Warning or Caution iconSafety Information
Use in accordance with the regulations. Indoor use only. Keep your device completely dry. Disconnect your device before cleaning it with a dry cloth.

Box content

SALUS Thermostat Sensor TS600 User Guide - Box content

SALUS Thermostat Sensor TS600 User Guide - 2x fixing screws & Quick Guide

SALUS Thermostat Sensor TS600 User Guide - 2x 2AA alkaline batteries

2x 2AA alkaline batteries

Mounting

SALUS Thermostat Sensor TS600 User Guide - An external sensor can be connected to the S1 and S2 terminals. Purchased separately

An external sensor can be connected to the S1 and S2 terminals. Purchased separately.

SALUS Thermostat Sensor TS600 User Guide - Mount the back case on the wall

Mount the back case on the wall.

SALUS Thermostat Sensor TS600 User Guide - nsert the batteries. TS600 will automatically go into pairing mode

Insert the batteries. TS600 will automatically go into pairing mode.

SALUS Thermostat Sensor TS600 User Guide - Add the front case

Add the front case.

LED Indication

SALUS Thermostat Sensor TS600 User Guide - LED Indication

Pairing

SALUS Thermostat Sensor TS600 User Guide - PairingSALUS Thermostat Sensor TS600 User Guide - PairingSALUS Thermostat Sensor TS600 User Guide - Pairing

Follow the onscreen instructions to complete the setup.

SALUS Thermostat Sensor TS600 User Guide - Follow the onscreen instructions to complete the setup

Button operation

SALUS Thermostat Sensor TS600 User Guide - Touch sensor area

Touch sensor area

Press the touch button to see the status of the device. If TS600 is calling for HEAT, the LED will be GREEN. If TS600 is SATISFIED, the LED will be RED.

If TS600 is paired, press and hold the touch button for 3 seconds. TS600 will enter Identify mode and will send Identify command to all related devices.
TS600 can be locked or unlocked via the app.

To unlock the device manually, you need to reset the device first and then press and hold the touch button for 10 seconds during the first minute after reboot. The device will reset again and unlock.

To perform a reset, press and hold the touch button for 10 seconds. The LED will turn red for 5 seconds. TS600 will leave the network and reset. Once completed, the TS600 will re-enter pairing mode.

DISTRIBUTOR OF SALUS
CONTROLS:
QL CONTROLS Sp. z o.o., Sp. k. Rolna 4,
43-262 Kobielice,
Poland

Head Office:
SALUS Controls Plc
Units 8-10 Northfield
Business Park
Forge Way, Parkgate, Rotherham
S60 1SD, United Kingdom
T: +44 (0) 1226 323961
E: [email protected]

www.salus-controls.eu

SALUS Thermostat Sensor TS600 User Guide - Computime Logo

SALUS Controls is a member of the Computime Group

Maintaining a policy of continuous product development SALUS Controls plc reserve the right to change specification, design and materials of products listed in this brochure without prior notice.

Issue date: 2021 01
Version: V001

SALUS Thermostat Sensor TS600 User Guide - Certified icon

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals