Speakers Sk600 Wireless Speaker User Guide (+ PDF)

Contents hide

1 Speakers SK600 Wireless Speaker User Guide

2 PACKING CONTENT

3 POWER ON

4 BLUETOOTH CONNECTION

13 TechnicalSpecification

14 Documents / Resources

14.1 References

15 Related Posts

Speakers SK600 Wireless Speaker User Guide

PACKING CONTENT

POWER ON

BLUETOOTH CONNECTION

Connected

Pairing

MODE SWITCH

PLAY

HANDS-FREE CALL

LIGHT

MIC

MICROPHONE

*The UHF connection is enabled by default when the speaker is turned on If you want to connect the second microphone ,please check the channel of the first one,if the channel of the first one s CHA,then switch the channel of the second microphone to CHB

A/B Fequency band switch:

Press and hold the” “button at the same time under the power-off status,it will display CHB or CHA and power on in 3 seconds.

CHARGE

FAQ

Problems	How to solve
When the Signal of the microphone is not good or is stuck	Short press “+””-”to select the appropriate frequency band from CH01-CH10.
When the microphone cannot be connected to the host	Press and hold the“”and“-”simultaneously in the power-on state, then “DE” will be displayed on the screen ,it will restore to the default settings and reconnect.
If the microphone cannot be turned on	please plug in the charging cable to charge and activate;
How to pair with a new microphone?	While the speaker in power off state, microphone in power on state ,press and hold the “”and “+” button of the microphone simultaneously, the screen will display the “ID“ and enter the ID paring status.
	At this time,the speaker can be automatically paired with the ID when it is turned on.(After the connection is successful, the speaker will have a beep).
How to clear the ID of the microphone?	Microphone: Press he “”and“-” simultaneously in the power on state ,the “DE”will be displayed on the screen,it will restore to non IDstatus.
	Note: If the microphone has cleared its ID and needs to be connected to the speaker again ,re-pair the ID according to the method of the new microphone.

TechnicalSpecification

Speaker :2×3 inch full-range speaker
PassiveRadiators: 90mmx 2pcs
SNR: >89dB
Batterytype: Lithium battery (3.7V4500mAh)×2
Charginginterface: USBType-C
Chargingtimeofbattery: Approx. 4.5hours (5V/3A)
Musicplayingtime: Approx. 13hours (depending on volume and audio content, with dynamic lightoff )
Bluetoothversion: 5.0
Hands-freecall： Yes
Playableformat: MP3、WMA、WAV、FLAC APE(MicroSDCard/Udisk)
Dynamiclight: RGBambient lighting
Amplifierfunction： Support wireless micropone amplification function
Dimensionofproduct: W307mm*H150.5mm*D140mm/W12.08″xH5. 2″xD5.51″
Weightofproduct: 2280g