Jtact S12 Wireless Earbuds With Charging Case User Manual

Jtact S12 Wireless Earbuds With Charging Case User Manual

JTact logoS12 Wireless Earbuds with Charging Case
User ManualJTact S12 Wireless Earbuds with Charging CaseS12

User Manual
Manual before operating your device. In order to avoid unnecessary injuries, pleased° do not Disassemble this product by yourself, and please use a standard charger.

Product Contains

JTact S12 Wireless Earbuds with Charging Case fig 1

Product Specification

Driver:6mm
Support Profile: NEP/ AVRCP/ A200
Embeds Charging Time: Up to 1 Hour
Charging case Charging Time. Up to 1.5 Hours
Charging case Charging Time Up to 3 Hours Wireless
Working Voltage: 5V
Transmission Range: Up to 10m
Working Temperature: -30)- 70′
WigM:136.8g
Power On / off

  1. Earbuds will auto power on and connect when you open the charging ease.
  2. Earbuds will auto power off and disconnect when you dose the charging case.
  3. The charging case is open but the earbuds don t power on, please long press the touch button for 2 seconds to power them on. (and please charge the charging case)
  4. If charged case does but the earbuds don’t power off, please long press the tooth button for 5 seconds to power them on. (and please charge the charging case)

JTact S12 Wireless Earbuds with Charging Case fig 4

Bluetooth Pairing

When you use earbuds for the first time, please connect your cellphone/laptop.
Open the charging case and check the vitae and red LED light flash earbuds.
Turn on the Bluetooth page on your cellphone or laptop and open the cellphone Bluetooth.
Select *S12- to connect the device, the white and red Ught off when you connect the telephone.
The device will automatically turn off if not connected cellphone within S minutes.

Reset Earbuds

When your earbuds got a problem, please try to reset earbuds.
Short press the left &right touch button for times at some time to reset. JTact S12 Wireless Earbuds with Charging Case fig 4

Product Wear

Steps: Take out the earbuds. (right earbud on left side / left earbud on the right side)
Step2: Insert the ear cap into your ear.
Step3:Put the ear hook over back your ear.
Step4Adjust by twisting for comfort and security.
JTact S12 Wireless Earbuds with Charging Case fig

Product Control

JTact S12 Wireless Earbuds with Charging Case icon 10 Play/Pause
Short press the touch button twice
JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21
Press twice
JTact S12 Wireless Earbuds with Charging Case icon 11 Previous song
Long press Left touch button for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 20
Long press for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 12 Next Song
Long press the Right touch button for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 20
Long press for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 13 Volume Up
Short press the Right touch button once
JTact S12 Wireless Earbuds with Charging Case icon 21
Short press
JTact S12 Wireless Earbuds with Charging Case icon 14 Volume Down
Short press Left touch button once
JTact S12 Wireless Earbuds with Charging Case icon 21
Short press
JTact S12 Wireless Earbuds with Charging Case icon 15Answer a Call
Short press the touch button twice
JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21
Press twice
JTact S12 Wireless Earbuds with Charging Case icon 16 End a Call
Short press the touch button twice
JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21
Press twice
JTact S12 Wireless Earbuds with Charging Case icon 17Reject Call
Long press the touch button for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 20
Long press for 2 seconds
JTact S12 Wireless Earbuds with Charging Case icon 18 Switch a call
Short press the touch button twice
JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21
Press twice
JTact S12 Wireless Earbuds with Charging Case icon 19 Voice Assistant
Short press the touch button thrice
JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21JTact S12 Wireless Earbuds with Charging Case icon 21
Press thrice

Product Charging

  1. Put the earbuds back charging case to charging earbuds.
  2. Plug the USB type-C to charge the charging case.
  3. The power display will tell you the charging case power and Earbuds
    JTact S12 Wireless Earbuds with Charging Case fig 2

Wireless Charging
JTact S12 Wireless Earbuds with Charging Case fig 3
We recommend you also can use a wireless charging pad to charge the charging case.(up to 3 hours from 0% – 100%)

Safety For You

JTact S12 Wireless Earbuds with Charging Case iconDo not expose device to liquids, moisture or humidity. It has electronics and a battery in it. Neither of them likes getting wet.
JTact S12 Wireless Earbuds with Charging Case icon 1 Don’ t use abrasive cleaning solvents to clean your device. Wipe them down with a slightly damp cloth if and when necessary.
JTact S12 Wireless Earbuds with Charging Case icon 2Remove and clean the earbuds tips regularly, to ensure that you always enjoy the best sound possible from your device.
JTact S12 Wireless Earbuds with Charging Case icon 3Do not expose device to extremely high or low temperatures as this may damage the battery or even deform the plastic parts.
JTact S12 Wireless Earbuds with Charging Case icon 4Don’ t throw yours device in a fire to dispose it. The internal battery may explode.
JTact S12 Wireless Earbuds with Charging Case icon 5Don’ t try to disassemble your device. There are no user serviceable parts inside it.
JTact S12 Wireless Earbuds with Charging Case icon 6Try not to drop your device and keep it away from sharp objects such as keys in your pockets.
JTact S12 Wireless Earbuds with Charging Case icon 7Only charge your device from 5V USB ports such as phone chargers and laptops or PCs.
JTact S12 Wireless Earbuds with Charging Case icon 8Never listen to music at high volumes or you may permanently damage hearing.
JTact S12 Wireless Earbuds with Charging Case icon 9Pay attention to your surroundings and never wear any headphones while riding, driving or walking in traffic. You do not come with any warranty.

Warranty

The warranty covers your device, including accessories against manufacturing defects for 1 year from the date of purchase.
Which are not covered in the warranty.
Unauthorized tampering, modifications, or repairs of the device. Physical damage of the device on the account of abuse, handling, storage, installation or testing including any use that is not in accordance with the product manual.
Certification
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not turn in a Pakula installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction. JTact logo

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals