Certa Ctaczk3631a Portable Air Compressor Pump Tyre Inflator User Guide (+ PDF)

Problem	Cause	Solution
The compressor will start	Ensure that the compressor is properly connected to the power source	Connect the 12V connector to a 12V socket.
There is insufficient supply voltage	Try using another 12V socket.
The fuse is blown	Replace it with a new fuse.
The compressor starts, but there is no pressure	Loose hose connections	Check the air hose and adapter, replacing them if necessary.
The compressor is not properly connected to the 12V socket	Connect the 12V connector to a 12V socket.

Usage Instructions:

Inflating Tyres:

Step 1: Prepare the Compressor:

Make sure the compressor is properly connected to a 12V power
source.

Step 2: Attach the appropriate adapter:

Presta valve adapter: Allows you to switch a Presta valve to a
Schrader valve. Suitable for mountain bikes, electric bikes,
motorcycles.
Narrow inflating adapter: Suitable for most inflatables,
swimming rings, air mattresses.
Short inflating adapter: Suitable for balloons.
Ball adapter: Suitable for basketballs, footballs and other
kinds of balls.

Step 3: Set the desired air pressure:

Check the recommended air pressure for your specific product
using the air pressure guide below.
Use the unit button and increase/decrease buttons on the
control panel to set the desired air pressure.

Step 4: Start Inflating:

Attach the inflation hose to the tire valve or the item you
want to inflate.
Press the power switch to start the compressor.
The current air pressure will be displayed on the unit
display.

Note: For convenient usage during night-time or
in poorly lit areas, the compressor is equipped with a built-in LED
light.

Replacing the Fuse:

Unscrew the cap on the 12V connector.
Take out the used fuse and replace it with a new fuse.
Replace the cap on the 12V connector.

Note: For more information and additional
assistance, please visit help.kogan.com.

View Fullscreen

PORTABLE AIR COMPRESSOR PUMP TYRE INFLATOR
CTACZK3631A

SAFETY & WARNINGS
Read these instructions carefully before using this product for the first time. Retain this user guide for future reference.
· This product is suitable for the inflation of small cars tires, motorcycle tire, bicycle tire, balls, swimming rings and other inflatables.
· This product is not suitable for use in large trucks. · This product is only applicable with 12V sockets. Do not use it with 24V sockets. · The product and hose can get hot during extended usage. · To avoid over-inflation and potential injuries, always confirm the required air pressure of
the item before inflating. · Avoid storing this product in high temperature environments. · Do not bend or step on the hose during inflation. · Do not leave the product unattended during operation. Always pay attention to avoid
over-inflating. · Do not expose the product to moisture, heavy falls, water immersion and mud or sand
ingress. · This product contains a DC motor which may generate electric sparks during operation.
Do not place it near flammable liquids or gases during operation. · Ensure the product is stored between -10°C ~ 45°C. · Excessive heat or cold will shorten the life of the product and damage the battery. · This product is not a toy. Do not allow children to play with it. · Ensure children and pets are supervised and kept at a safe distance during operation. · Before setting the air pressure value, ensure that you have selected the correct unit of
measurement, otherwise it may lead to over-inflation and potential injury. · Do not dismantle or modify this product in any way.

COMPONENTS

Air nozzle (x2)

Ball adapter

Spare fuse

Presta valve adapter

Inflation hose

OVERVIEW
3 4

1
2 5 6

7
1 Handle 2 Control panel 3 LED light 4 Air hose Control Panel

5 Light button 6 Power switch 7 12V Connector

Current Air Pressure
Unit Button Decrease button

KGF/CM²
M

Unit display Increase button

OPERATION
Inflating Tyres 1. Prepare the Compressor:
· Connect the portable compressor to a 12V socket source, such as your vehicle’s cigarette lighter.
· Place the compressor stable surface near the tyre you wish to inflate.
2. Attaching the inflation hose: · Attach the inflation hose to the air hose on the compressor. · Ensure that the connection is tight and free from leaks.
3. Set the Desired Pressure: · Refer to the tyre’s recommended pressure, typically indicated on the tire sidewall or in your vehicle’s manual. · Place the power switch in the ON position. · The compressor will start running, and you should hear air flowing. · Press the unit button “M” to switch the pressure units. · Use the increase “+” and decrease “-” buttons to set the desired air pressure. Wait for the display to stop flashing.
4. Inflate the Tire: · Place the nozzle onto the tyre’s valve stem, ensuring a secure connection. · Monitor the digital display as the tire inflates. · The compressor will stop automatically once the set pressure is reached.
5. Check the Pressure: · Detach the hose from the tyre’s valve stem. · Use a separate tire pressure gauge to verify that the tire pressure matches the desired level. · Repeat steps 2-6 if necessary.

LED Light For convenient usage during night-time or in poorly lit areas, the compressor is equipped with a built-in LED light.
· To turn the LED light ON, press the light button. · To turn the LED light OFF, press the light button again.

Accessories As per your requirement, attach one of the included adapters to the inflation hose:

Adapter

Usage
Presta valve adapter: Allows you to switch a Presta valve to a Schrader valve. Suitable for mountain bikes, electric bikes, motorcycles.
Narrow inflating adapter: Suitable for most inflatables, swimming rings, air mattresses.
Short inflating adapter: Suitable for balloons.
Ball adapter: Suitable for basketballs, footballs and other kinds of balls.

Air Pressure Guide
In order to maintain user safety and avoid over or under inflating items, always check the recommended air pressure of the product.
Below is a guide of recommended air pressure values for common products.

Category
Bicycle
Motorcycle Car Ball

Product Type
Folding bicycle tire 12, 14, 16-inch bicycle tire 20, 22, 24-inch bicycle tires 26, 27.5, 29-inch bicycle tire 700c road bike open tire 700c highway support lower tube tire
Motorcycle tire
Small car tire
Basketball Football Volleyball Rugby

Recommended Pressure Range
45-50psi 30-50psi 40-50psi 45-65psi 100-130psi 120-145psi
26-43psi
31-40psi
7-9psi 8-16psi 4-5psi 12-14psi

Replacing the Fuse
1. Unscrew the cap on 12V connector. 2. Take out the used fuse and replace it with a new fuse. 3. Replace the cap on the 12V connector.

SPECIFICATIONS

Input Voltage Power Wire Length Cylinder Diameter MAX Air Pressure

DC 12V 100W 3m 22mm 150PSI

TROUBLESHOOTING

Problem The compress will start

Cause

Solution

Ensure that the compressor is properly connected to the power source

Connect the 12V connector to a 12V socket.

There is insufficient supply Try using another 12V

voltage

socket.

The fuse is blown

Replace it with a new fuse.

The compressor starts, but there is no pressure

Loose hose connections

Check the air hose and adapter, replacing them if necessary.

The compressor is not The LED light won’t turn on properly connected to the
12V socket

Connect the 12V connector to a 12V socket.

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com