MDR7716G Oval Framed Hanging Wall Mirror
Product Information
This product is a mirror with a decorative knob for hanging on
the wall. The mirror should be cleaned with a soft cloth that is
not too wet, and sharp objects should not be used on the surface.
Additionally, users should avoid using acids or alkaline cleaning
agents on the mirror.
Product Usage Instructions
- Before beginning assembly, ensure that all parts are present
and undamaged. If any part is missing or damaged, do not attempt to
assemble the product. - Choose a desired placement for the mirror on the wall and hold
it against the wall. Mark the hanging point with a pencil. - Using a 1/8 inch drill bit, drill a hole for the plastic
drywall anchor. Insert the anchor into the hole using a screwdriver
until it is flush with the wall. - Insert the metal screw with attached decorative knob into the
anchor by holding the knob and turning it clockwise. - Place the ring around the extended knob to complete the
assembly process.
Estimated assembly time for this product is 5 minutes and tools
required for assembly include a pencil and an electric drill.
Important Notice
It is important to ensure that all parts are present before
beginning assembly of this product. Additionally, users should
assemble this product on a soft surface to prevent scratching the
finish during assembly.
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents.Sharp objects will damage(scratch) the surface.Wipe the surface with a soft cloth(not be too wet).
NOTICE
*Please make sure that you have all parts indicated before you begin assembly of this item *This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Plastic drywall anchor
1X
B
Metal screw with attached decorative knob
1X
PREPARATION
Before beginning assembly of product,make sure all parts are present. If any part is missing or damaged,do not attempt to assemble the product. Estimated Assembly Time:5 minutes. Tools Required for Assembly:Pencil,Electric Drill
Step 1
Determine the desired placement of the mirror on the wall.Hold the mirror against the wall and mark the hanging point with a pencil.
Step 2
Drill hole for anchor using 1/8 inch drill bit.Insert anchor into hole using screwdriver until anchor is flush with wall.
Step 3
Insert screw into anchor by holding the knob and turning clockwise.
Step 4 Place ring around extended knob.
