100x25cm Set Frame H-Module

SET Frame H-Module Assembly Manual

Package Contents

Before starting the assembly process, ensure that you have
received all the necessary parts included in the package. The
package should contain:

• SET Frame H-Module components
• Enclosed Allen key

Assembly Instructions

Assembling the SET Frame H-Module is a straightforward process.
Please follow the steps below:

1. Unpack all the components and lay them on the floor.
2. Arrange the parts in the following order, ensuring that the
   supports are positioned 30cm from the top and 30cm from the
   bottom.
3. Attach the supports using the keder angle profiles, positioning
   them 30cm from the top and bottom.
4. Slide the keder profiles into the frame at the top-left and
   bottom-right corners.
5. Your SET Frame H-Profile is now ready!

For more detailed information about our SET Frame modules, you
can scan the QR code located at the bottom of this page.

Note: Attach the stickers provided behind the lowest wingnut
only when the strip is exactly inside the frame.

SET FRAME H-MODULE ASSEMBLY MANUAL

1

3

Package contents.

Assembling this SET frame module is very easy. You only need the enclosed Allen key. After unpacking, lay all the parts on the floor and follow the instructions below. More information about our SET frame modules can be found by scanning the qr code at the bottom of this page.
2
Put all parts in this order on the floor. The supports come 30cm from the top and 30 cm from the bottom.
4

Attach the supports with the keder angle profiles (30 cm from top & bottom).
5

Slide the keder profiles into the frame at the top left and bottom right of the frame.
Your SET Frame H-Profile is ready!

Attach the stickers “do not remove” behind lowest wingnut when strip is exactly inside the frame.