K3 Hoverboard Seat
K3 Hoverboard Seat
User Manual
Contents
- Riding Safety
- Service and Warranty
- Packing List
- Assembly Introduction
For any further assistance or help, please contact us at:
[email protected]
Riding Safety
- The hoverboard kart is designed for recreational purposes. It
is recommended to practice riding skills before mastering them.
iHoverboard is not responsible for any injuries or damage caused
due to the rider’s inexperience or failure to follow the
instructions provided in this document. - Ensure that each new rider wears a helmet and other protective
gear while riding. Do not ride with high heels. Always wear
properly strapped closed-toe shoes. - Do not attempt your first ride in any area where you might
encounter children, pedestrians, pets, vehicles, bicycles, or other
obstacles and potential hazards. - Parental/adult supervision is necessary for children under 12
years of age. If you are under 18 years of age, please seek your
parent’s permission before riding. - The safety speed is 6.2mph. When the speed exceeds 7.5mph, the
kart will be out of control for 0.3-0.5s, and the user cannot apply
the brakes immediately. - The hoverboard kart is not suitable for users weighing less
than 44lbs/20kg or more than 270lbs/120kg. The maximum weight limit
of 270 lbs (120 kg) includes items that might be worn or carried
such as backpacks, clothes, or personal items. Failure to adhere to
the minimum and maximum weight limits can cause personal injury to
the user and damage to the hoverboard kart. - Before each ride, check for loose fasteners and damaged
components. If the hoverboard makes abnormal sounds or signals an
alarm, immediately stop riding. - Never ride at high speeds on uneven terrain or slopes. Never
ride in the dark or dimly lit areas. Do not ride in the snow, rain,
or on roads that are wet, muddy, icy, or slippery for any reason.
Do not ride over obstacles (sand, loose gravel, or sticks). Doing
so could result in a loss of balance or traction and could cause a
fall. Never ride backward for long distances or at high
speeds.
Service and Warranty
- The warranty period is consistent with the national and local
warranty policy. The warranty period is calculated from the date of
purchase by the user (on the basis of the date on the purchase
receipt). - Maintenance costs beyond the warranty period and beyond the
scope of the warranty only incur maintenance costs. - If there is any help or accessory replacement needed, please
try to send messages to ihoverboard: [email protected]
Packing List
| Tools Name | Photo |
|---|---|
| 1*Frame (2 parts) | |
| 1*Adjustment knob | |
| 4*Velcro straps | |
| 2* Bases | |
| 2* Handles | |
| 1* Wheel nut | |
| 1*Kart seat | |
| 2*Gasket | |
| 4* Screws of handles (A) | |
| 8* Nuts (B) | |
| 2*Screws of the frame (C) | |
| 4*Large washers (D) | |
| 4*Black washers (E) | |
| 4*Screws of the seat (F) | |
| 4*Small washers (G) | |
| 1*Wrench | |
| 1*Allen wrench |
Assembly Introduction
- Install the handles on the bases on both sides with screws of
handles (A) and nuts (B).
- A. Screws of handles
- B. Nuts
screws of the frame (C), large washers(D), and black
washers(E).
- C. Screws of the frame
- D. Large washers
- E. Black washers
frame and back frame.
K3
Hoverboard Seat
USER MANUAL
CONTENTS
1. Riding Safety
1
2. Service and Warranty
2
3. Packing List
2
4. Assembly Introduction
3
NEED HELP??
Please contact us: [email protected]
RIDING SAFETY
1. The hoverboard kart has been designed as a recreational product. Before mastering riding skills, you need to practice. iHoverboard is not responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.
2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the hoverboard kart you risk injury or death from loss of control, collisions, and falls. When entering public spaces always comply with the local laws and regulations. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas. Users are responsible for following all local, state, and federal laws regarding the use of this product.
3. Make sure each new rider wears a helmet and other protective gear. Do not ride with high heels. Always ride with properly strapped closed-toe shoes.
4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.
5. Parental/adult supervision is necessary with children under 12. If you are under 18, please get your parent’s permission.
6. The safety speed is 6.2mph. When the speed is over 7.5mph, the kart will be out of control for 0.3-0.5s and the user can’t apply the brakes immediately.
7. The hoverboard kart is not for users weighing less than 44lbs than 44lbs/20kg or more than 270lbs/120kg. The maximum weight limit of 270 lbs (120 kg) includes items that might be worn or carried such as backpacks, clothes, or personal items. Failure to adhere to the minimum and maximum weight limits can cause personal injury to the user and damage to the hoverboard kart.
8. Before each ride check for loose fasteners, and damaged components. If the hoverboard makes abnormal sounds or signals an alarm, immediately stop riding.
9. Never ride at high speeds on uneven terrain or slopes. Never ride in the dark, or dimly lit areas. Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall. Never ride backward for long distances or at high speeds.
1
SERVICE AND WARRANTY
1. The warranty period is consistent with the national and local warranty policy.The warranty period is calculated from the date of purchase by the user(on the basis of the date on the purchase receipt).
2. Maintenance costs beyond the warranty period and beyond the scope of the warranty only incur maintenance costs.
3. If there is any help or accessory replacement needed, please try to send messages to ihoverboard: [email protected]
PACKING LIST
Tools Name
1*Frame (2 parts) 1*Adjustment knob 4*Velcro straps 2* Bases 2* Handles 1* Wheel nut 1*Kart seat 2*Gasket
Photo
4* Screws of handles (A) 8* Nuts (B) 2*Screws of the frame (C) 4*Large washers (D) 4*Black washers (E) 4*Screws of the seat (F) 4*Small washers (G) 1*Wrench 1*Allen wrench
2
ASSEMBLY INTRODUCTION
1. Install the handles on the bases on both sides with screws of handles (A) and nuts (B).
A. Screws of handles
2.Install the whole handles on the frame on both sides with screws of the frame (C), large washers(D), and black washers(E).
C. Screws of the frame
D. Large washers E. Black washers
B. Nuts
3. Fasten the adjustment knob into the hole to connect the front frame and back frame.
4. Install the seat on the frame with screws of the seat (F) and small washers (G).
F F
F FG G
G G
5. Adjust the slidable metal plates to fit your hoverboard size, then fasten the nut tight. Put and adjust the velcro straps tight.
6. Your kart is ready to go.
Slidable metal plates
Velcro strap
3
The manufacturer reserves the right to make changes to the product, and update this manual at any time. www.ihoverboard.com
