00200125
USB OTGHub/CardReader
USB-OTG-Hub/Kartenleser
Operating Instructions
Package Contents
- USB OTGHub/CardReader
- USB adapter
- These operating instructions
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning –Data Loss
- Ensure that data transfer is complete before you remove a storage medium from the device.
- If you do not do this, data may be lost.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the
manufacturer. - Common values are500 mA for USB-A2.0, 900 mA for USB-A3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognize the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of
the product or from failure to observe the operating instructions and/ or safety notes.
Technical Data
 | |
| Operating voltage /current consumption | 5V max. 500 mA |
| Compatibility | USB-Aport USB-micro port |
| System requirements | Windows 11 /10/8/7 Mac OS 10.8 ≥ OTG: Android 4.0 ≥ The smartphone/ tablet must support the OTG technology |
| USB specification | USB 2.0 |
Note
- Ifthereisinterference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
Alllistedbrandsare trademarks of the corresponding companies. Errors and omissions excepted,
and subjecttotechnicalchanges. Our general termsofdeliveryand payment is applied.
00200125/08.21
