Hama 300082 Usb Otg Hub-card Reader Instruction Manual

Hama 300082 Usb Otg Hub-card Reader Instruction Manual

hama-logo300082 USB OTG Hub-Card Reader
Instruction Manualhama 300082 USB OTG Hub-Card Reader

Operating instruction

Package Contents

  • USB OTGHub/CardReader
  • USB adapter
  • These operating instructions

Safety Notes

  • Donot attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Donot open the device or continue to operate it if it becomes damaged.
  • Donot operate the product outside the power limits given in the specifications.
  • Donot modify the product in any way. Doing so voids the warranty.
  • Keep this product, like all electrical products, out of the reach of children!
  • Use the product for its intended purpose only.
  • Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
  • The product is intended for indoor use only.
  • Donot use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Donot use the product in moist environments and avoid splashes.
  • Donot use the product in areas where the use of electronic devices is not permitted.
  • Donot drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.
    Warning-icon.png Warning –Data Loss
  • Ensure that data transfer is complete before you remove the storage medium from the device.
  • If you do not do this, data may be lost.
    Warning-icon.png Warning
  • Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
  • Common values are500 mA for USB-A2.0, 900 mA for USB-A3.0, and up to 3000 mA for USB-C.
  • Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.

Startup and Operation

  • Switch on your computer and boot the system.
  • Connect the product to a free USB port on your computer.
  • You donot have to install drivers; the computer will automatically recognize the product.
  • If necessary, follow the instructions for your operating system.
  • In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Important informationTechnical Data

Operating voltage/current consumption5V max. 500 mA
CompatibilityUSB-Aport
USB-micro port
System requirementsWindows 11 /10/8/7
Mac OS 10.8 ≥
OTG: Android 4.0 ≥
The smartphone/ tablet must support the OTG technology
USB specificationUSB 2.0

Important information Note

  • If there is interference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.

hama-logo

Service Et Support
iconwww.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00300082/09.21

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals