Hama 2k 054141 Usb Otg Hub Instruction Manual

Hama 2k 054141 Usb Otg Hub Instruction Manual

hama LOGOUSB OTG Hub/Card Reader
USB-OTG-Hub/Kartenleser

Operating Instructions

Package Contents

  • USB OTG Hub/Card Reader
    USB adapter
    These operating instructions

Safety Notes

  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Keep this product, as all electrical products, out of the reach of children!
  • Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • The product is intended for indoor use only.
  • Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Do not use the product in moist environments and avoid splashes.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Do not drop the product and do not expose it to any major shocks.
  •  Dispose of packaging material immediately according to locally applicable regulations.

Warning-icon.png Warning – Data Loss

  • Ensure that data transfer is complete before you remove a storage medium from the device.
    If you do not do this, data may be lost.

Warning-icon.png Warning

  • Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
  • Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
  • Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.

Startup and Operation

  • Switch on your computer and boot the system.
  • Connect the product to a free USB port on your computer.
  • You do not have to install drivers; the computer will automatically recognize the product.
  • If necessary, follow the instructions for your operating system.
  • In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/ or safety notes.

Technical Datawestermo DDW 120 Wolverine Industrial Ethernet SHDSL Extender - warning2 

Operating voltage / current5 V max. 500 mA
consumptionUSB-A port
CompatibilityUSB-micro port
System requirementsWindows 11 / 10 / 8 / 7
Mac OS 10.8 ≥
OTG: Android 4.0 ≥
The smartphone/ tablet must support the OTG technology
USB specificationUSB 2.0

westermo DDW 120 Wolverine Industrial Ethernet SHDSL Extender - warning2 Note
• If there is interference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.

Hama GmbH
Fr Co KG 86652
Monheim/Germany
Service Et Support
WEBSITE ICONwww.hama.com
CALL SERVICE+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals