X1 Video Projector
Product Information:
This device is designed to comply with part 15 of the FCC Rules,
ensuring its operation meets specific regulatory standards. It is
equipped with features that minimize harmful interference and allow
the device to function properly even in the presence of
interference from external sources.
It is important to note that any changes or modifications made
to the device that are not explicitly approved by the responsible
party for compliance may result in the user losing their authority
to operate the equipment.
This equipment also adheres to FCC radiation exposure limits,
ensuring it can be safely used in an uncontrolled environment. To
maintain safety, it is recommended to install and operate the
equipment with a minimum distance of 20cm between the radiator and
your body.
Product Usage Instructions:
1. Ensure that the device is placed in an appropriate location,
where it is easily accessible and has sufficient ventilation.
2. Connect the device to a power source using the provided power
cable.
3. Turn on the device by pressing the power button or following
the specific instructions mentioned in the user manual.
4. Once turned on, familiarize yourself with the various
controls and settings available on the device.
5. To ensure compliance with FCC regulations, avoid making any
unauthorized changes or modifications to the device.
6. Maintain a minimum distance of 20cm between the radiator (the
part of the device emitting signals) and your body during
operation.
7. If you experience any issues or interference while using the
device, consult the troubleshooting section of the user manual or
contact customer support for assistance.
8. When not in use, it is recommended to turn off the device and
disconnect it from the power source.
9. Regularly clean the device using a soft, dry cloth to remove
dust or dirt that may accumulate on its surface.
10. Follow any additional instructions provided in the user
manual for specific features or functionalities of the device.
By following these product usage instructions, you can ensure
proper operation and compliance with FCC regulations while using
the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
