Magnet Mount LED Light Bar
BATTERY INSTALLATION
- Slide off the narrow battery compartment cover.
Read instructions or watch the easy-to-follow videos. Scan QR code or visit https://byjasco.com/48378i - Insert 3 AA batteries (not included), noting polarity
- Replace compartment cover. Important: Different types of batteries or new and used batteries should not be mixed. Exhausted batteries should be removed from the fixture and disposed of properly.
Read instructions or watch the easy-to-follow videos. Scan QR code or visit SURFACE MOUNTING
- Clean the mounting surface of any dust or debris.
- Peel the paper backing from the metal strip and press it firmly onto the surface.
- Place the magnetized back of the light bar onto the mounted metal strip.
Note: You can mount the light to other metallic surfaces without using the metal strip.
OPERATION
ON/OFF Switch; Manually turn the light ON or OFF and activate the light bars connection with the IR remote.
MADE IN CHINA/HECHO EN CHINA
CAUTION
- BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY OR PRODUCT DAMAGE
- DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES
- REPLACE ALL BATTERIES AT THE SAME TIME
- REMOVE BATTERIES IF THE PRODUCT IS TO BE UNUSED FOR AN EXTENDED PERIOD OF TIME
©2021 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands.
LLC and related subsidiaries and are used under license by Jasco Products Company, LLC.
Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM-8 PM, M-F, Central Time.
90-day warranty. Visit www.byjasco.com for warranty details.
