Visual Comfort Pcd 3603 Montaigne Medium Table Lamp Instruction Manual

VISUAL COMFORT PCD 3603 Montaigne Medium Table Lamp

ASSEMBLY INSTRUCTIONS

1.  Carefully remove all parts from the box. Place on a clean, soft surface.
2.  Remove socket ring (D) from socket (E).
3.  Install harp (C) to socket (E) and secure with socket ring (D).
4.  Remove finial (A) from harp (C).
5.  Remove shade (B) from packaging and install to harp (C) using finial (A).

NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

1.  Install light bulb into the socket.
2.  Remove protective cover (F) from plug.
3.  Plug into electrical outlet and test fixture.

NOTICE

This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

Scissors

Care Instructions

Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.