651342M
XIM651342 – 12/19
www.littletikes.com
Adult assembly required
Approx. assembly time:30 min.
Look for video of assembly at
MAGIC FLOWER WATER TABLE™
Ages: 2 years & up
Please save the sales receipt for proof of purchase.
WARNING:
ADULT ASSEMBLY REQUIRED.
- Keep these instructions for future reference.
- Prior to assembly, this package contains small parts: hardware that is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.
- Adult supervision is required. Do not leave children unattended.
- This product is intended for outdoor domestic family use only.
- This product is intended for use by children ages 2 years and up.
- Use this product on a firm, level surface and avoid using near swimming pools, on or near steps, hills, or inclines.
- Do not allow children to sit, stand play or climb on the top of the surface. Failure to do so may cause the product to become unstable.
- Intended for use with the supplied accessories only.
- Never fill with anything except clean tap water. The use of other liquids may be harmful or damage the unit. Never fill with sand or dirt.
- Do not store or leave water in the product when not in use.
DISPOSAL
- Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time equipment is discarded.
CONSUMER SERVICE TOLL-FREE NUMBER:
United States: www.littletikes.com
1-800-321-0183 Monday – Friday The Little Tikes Company
2180 Barlow Road Hudson, OH 44236
E-mail: [email protected]
United Kingdom: www.littletikes.co.uk
Little Tikes, MGA Entertainment (UK) Ltd 50 Presley Way Crownhill
Milton Keynes MK8 0ES Bucks, UK
Tel: +0 800 521 558 E-mail: [email protected]
Imported by MGA Entertainment Australia Pty Ltd
MINIMUM SIZE allowed is .2” Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113 Updated 12.2.11 per Paul Madan (new spacing)
Printed in the U.S.A. D.R.©2019 The Little Tikes Company
© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Please keep this address and packaging for reference since it contains important information. Contents, including specifications and colors, may vary from photos depicted on the package. Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
LIMITED WARRANTY
The Little Tikes Company makes fun, high-quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from
defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after the warranty expires—contact us for details.
Outside U.S.A and Canada: Contact the place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please keep this manual as it contains important information.
Tools required (not included)
Parts List
Photos are for reference only. Styles may vary from actual contents.
 |  |  |  |
| A. Top Basin (1) | B. Middle Basin 2 (1) | C. Middle Basin 1 (1) | D. Bottom Basin (1) |
 |  |  |  |
| E. Top Trunk (1) | F. Bottom Trunk (1) | G-1. & G-2. Small Branch halves (2) | H. Flower Assembly (1) |
 |  |  |
| J-1. Top Turtle (1) | J-2. Middle Turtle (1) | J-3. Bottom Turtle (1) |
 |  |  |  |
| K. (11)Screw – 3/8″ (.82 cm) | I. Bottom Turtle Support (1) | Screw – 1″ (2.54 cm) | M. Screw Cover (2) |
 |  |  |  |  |
| N. Watering Can (1) | O. Cup | P. Duck (2) | Q. Frog (2) | R. Fish and Leaf (1) |
 |  |
 DO NOT TIGHTEN!Install (2) screws (K) into the bottom trunk (F). Do not tighten. | TIGHTEN screw 7!DO NOT TIGHTEN screws 1 through 6! Install (7) screws (K) into the top trunk (E). Do not tighten screws 1 through 6. TIGHTEN screw 7. |
TIGHTEN!
Install (1) screw (K) into bottom location small branch (G). 
Insert bottom trunk (F) into the bottom basin (D). Align the notches on the bottom trunk with the center slot on the bottom basin and push down.
Install (4) screws (L) into the base of the trunk as shown. Tighten.
Insert middle basin 1 (C) onto the top of the bottom trunk. Line up the branch on the bottom trunk to the corresponding slot found on the bottom of the middle basin 1.
 |  |
| Tighten screws. | Part is keyed to fit. Insert top trunk (E) onto middle basin 1. |
Insert (2) screws (L) through (2) screw covers (M). Install a screw and screw cover into each side of the basin and into top trunk.
 |  |  |
| Insert middle basin 2 (B) onto the top of the top trunk. | Branch support SNAPS into place. | Turn the table around and tighten screws underneath. |
Align a small branch (G) with an opening on the top trunk (E). Push until you hear a snap.
 |  |
| Pull apart small branch to secure around tab. Insert top basin (A) onto the top of the top trunk. Line up the branches on the bottom trunk to the corresponding openings found under the top basin. |
 |  |
| Install (1) screw (K) into an upper location on the small branch (G). | Tighten (4) screws underneath. |
 |  |
| Insert flower assembly (H). |  HINT: turn the watering can upside down and place it on top of the flower assembly. Push down to assemble. |
Bottom Turtle Support (1)
Part is keyed to fit.
Insert bottom turtle support (I) into middle basin 1 as shown.
 |
| Part is keyed to fit. Insert bottom turtle (J-3) onto turtle support. Part is keyed to fit. |
Turtle Fun! Many ways to play!
 |
| Correct stacking order Part is keyed to fit. Stack the turtles one on top of the other. Located under the top basin leaf, allows water to overflow onto the spinning water wheel feature in the top turtle. Each turtle swivels and spins creating splashing fun! |
 |
| Have fun stacking each turtle onto the bottom turtle or play with the turtles individually moving them from basin to basin to see where they catch the water! |
Locate indentation for fish and leaf (R) on the bottom basin. Fit the fish and leaf into indent as shown.
Storage: Drain ALL water when not in use!
Always hold the water table by the trunk or branches when overturning to drain the water. Never grab the water table by the top or middle basins when moving or draining the unit.
