Parade Table Lamp
Product Information
The Parade Table Lamp Collection is a product designed by Jonas
Trampedach & Viola Heyn-Johnsen. It features an integrated LED
light source with a lifespan of 25,000 hours, equivalent to 8-10
years of general use. The lamp has a fitting type of integrated LED
with a power output of 5W and a color temperature of 2800K warm
white.
The product is designed for indoor use only and should not be
modified in any way. HAY, the manufacturer, does not accept
responsibility for modified or tampered products. The external
flexible cable or cord of the luminaire cannot be replaced; if
damaged, the entire luminaire should be replaced.
Interference may occur in certain installations. If the
equipment causes harmful interference to radio or television
reception, the user is encouraged to try the following measures:
reorient or relocate the receiving antenna, increase the distance
between the equipment and receiver, or connect the equipment to an
outlet on a different circuit. Consulting with a dealer or an
experienced radio/TV technician can also help resolve interference
issues.
It is important to note that changes or modifications to the
unit not approved by the responsible party for compliance may void
the user’s authority to operate the equipment. The device complies
with part 15 of the FCC Rules and is designed to not cause harmful
interference while accepting any received interference.
The product can be cleaned with a soft damp cloth and mild
detergent or a dry microfiber cloth. Alcohol or solvents should not
be used for cleaning, and abrasive or rough sponges should be
avoided. Always ensure that the power supply is turned off before
cleaning.
Product Usage Instructions
- Unpack all the parts and check that you have received all the
parts listed. - Plug the trailing cable into the power supply.
- Attach the correct adapter for your region.
- The lamp is now ready for use.
If any parts of the lamp need replacing, it is possible to
disassemble the light engine from the glass.
INSTRUCTION MANUAL
PARADE TABLE LAMP COLLECTION
DESIGN BY JONAS TRAMPEDACH & VIOLA HEYN-JOHNSEN
GENERAL INFORMATION
TECHNICAL DATA
This product is supplied with an integrated LED light source. The expected lifespan of the LED light source is 25,000 hours, which equates to 8-10 years of general use. When the light source reaches its end of life, the whole luminaire should be replaced.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FITTING TYPE | Integrated LED POWER (W) | 5 W COLOUR TEMPERATURE | 2800K warm white
ATTENTION
Ensure that the power supply to the circuit has clearly been turned OFF before installing the product. In some countries, electrical installation must be carried out by authorised electricians/ contractors; please check with your local authority for guidance.
The product must not be modified in any way. HAY accepts no responsibility for any products that have been modified or tampered with. The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire should be replaced. This lamp is designed for indoor use only.
Reorient or relocate the receiving antenna. Increase the distance between the
equipment and receiver. Connect the equipment to an outlet on a
different circuit to the one the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help.
CAUTION | Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
NOTE | This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp cloth and mild detergent, or a dry microfibre cloth. Do not use alcohol or any other solvents to clean the product and avoid using abrasive or rough sponges. Ensure that the power supply has been turned OFF before cleaning the product.
PARTS
Lamp Shade NB: Comes in three different sizes
Adapter
Power supply
12.
Unpack all the parts and check that you have received all the parts listed.
Plug the trailing cable into the power supply. Attach the correct adapter for your region. The lamp is now ready for use.
2. The lamp is now ready to use.
NOTE
If your lamp needs any parts replacing, it is possible to dissassemble the light engine from the glass.
Make sure the lamp is disconnected from the power supply. Turn it upside down and unscrew the two screws slightly but not all the way.
Turn the light engine counterclockwise until the two screws are free from the hooks on the bracket, tilt the light engine and pull it out from the glass shade.
Now you can replace any broken parts with original HAY replacement parts.
Place the light engine back into the glass shade and turn clockwise, locking the two screws into the hooks on the bracket.
Then use a screwdriver to fasten the two screws to ensure the light is properly assembled. The lamp is now ready to use again.
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific
materials to prolong the life of your lighting.
Please find our Care & Maintenance guide by scanning the QR code
You can find more relevant information on Parade Table Lamp Collection by scanning the QR code
You can also find the same information here hay.dk/downloads
30/03/2022
Havnen 1 8700 Horsens Denmark +45 4282 0282 / [email protected]
www.hay.com
HAY.dk – latest products, designer news and retailer info
HAY Summer Sale: 15% Off Contemporary Furniture & Accessories
