Kit Instructions
Crystal Cross Earring Kit
Take your artistic wire and cut them in half leaving you 2 equal lengths. Cut each of those in half, setting 2 aside for your second earring. Pinch one end of the wire with round nose pliers to curl the wire and create your circle.
On the second piece of wire, make a loop with your round rose pliers in the middle of the wire. This will be the horizontal length of the cross.
Go back to your first wire (with loop end) and load the following
Bicone / Round / Bicone / Round / Bicone
Add your second artistic wire (Using the middle loop to stack on your bicone).
Continue loading beads.
Bicone / Round / Bicone
Use your round nose pliers to create a loop at the top of your beads, creating the first section of your cross. 
We will now load the horizontal portion of the cross.
Now we need to load our horizontal beads.
Add a bicone, round, and bicone to each side of the wire, and create a loop to hold them in place.
Trim all excess wires.
Attach your ear wire, and repeat for your second earring.
For easy re-order, scan this QR code with your phone
https://qr.io/r/VK7LvE
