IMOU Bullet 2E IP Camera

Package content
Camera introduction

The pattern of the LED indicator is included in the following table.
| LED Status | Device Status |
| Off | Powered off/LED turned off Rebooting after reset |
| Red light on | Booting Device malfunction |
| Green light flashing | Waiting for network |
| Green light on | Operating properly |
| Red light flashing | Network connection failed |
| Green and red light flashing alternately | Firmware updating |

Tips

Installing the Camera
Troubleshooting
| Problem | Solution |
| Cannot set up camera | • Ensure your mobile device and the camera are within range of your Wi-Fi router. • Ensure the LED indicator on the camera isflashing green before beginning setup. |
| The APP says “Failed to configure device network” | • Reset your Camera and connect it again. • Some cameras only support 2.4GHz, while some routers have dual band, 2.4G/5G. Make sure you are connecting 2.4GHz only. |
|
The app says “Failed to bind” | The camera is already connected to Wi-Fi, but the router is: • Not connected to Internet • Poor network status • The Wi-Fi signal is not stable due to obstacles or electronic interference |
|
No picture / signal | • Ensure the LED indicator on the camera is flashing steady green. See ‘LED Status’ section for details if otherwise. • Ensure the camera is properly connected to power using the included USB power adapter. • Try repositioning the camera, router, or both to improve signal strength. |
| Picture is not clear | • Check the camera lens for dirt, dust, spider webs. Clean the lens with a soft, clean cloth. • Remove the vinyl cover on the camera lens. |
| No audio | • Ensure audio function on camera is turned on. • Ensure audio is turned up on viewing device. |
| Human detection not working | • Ensure you have enabled “Human Detection” in the Device Settings screen of the Imou LifeApp. |
| Camera stuck downwards | • Turn off Camera Shielding in Device Settings on the Imou Life app. |
| Phone is not reading QR code | • Clean the camera lens of your Smartphone • Ensure that there is enough light on the QR code • Don’t hold the QR code too close to the camera |
- Thank you for choosing IMOU.
- We are devoted to providing you easy smart home products.
- If you have problems using the product, please contact
- our service team before returning your product.
- Our service mail: service.[email protected]
- Frequently asked questions can be found at: imoulife.com/support/help
- @imouglobal
- E service.[email protected]
- www.imoulife.com





Troubleshooting


















