Contents hide
VREP3470AT HDMI extender
User Manual
Preface
Thank you for purchasing the Nedis VREP3470AT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis VREP3470AT transfers HDMI signal from one HDMI cable to another through an Ethernet cable.
The included infrared transmitters and receivers transfer infrared signals between the transmitter and receiver.
This allows you to use the remote control of your source device while in range of the receiver.
Intended use
This product is exclusively intended to transfer HDMI signal between two HDMI cables through an Ethernet cable.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product | HDMI extender | |
Article number | VREP3470AT | |
Dimensions (l x w x h) | 90 x 63 x 23 mm | |
Input transmitter / Output receiver | HDMI Type A | |
Output transmitter / Input receiver | CAT 5e/6a, RJ-45 | |
Max. supported video format | Up to 30 m | 4K @ 60 Hz |
Up to 40 m | 4K @ 30 Hz | |
Up to 50 m | 1080p @ 60 Hz | |
Other supported video formats | 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K2K @ 30 Hz / 4K2K @ 60 Hz | |
Supported audio format | LPCM ; DTS Digital, Dolby Digital (incl. DTS-HD and Dolby True HD) | |
HDCP | HDCP 2.2 | |
Max. transfer rate | 18 Gb/s | |
Infrared support | 20,000 – 60,000 Hz | |
Operating temperature | 0 °C – +40 °C 5 – 90% (no condensation) | |
Operating humidity | ||
Power supply | 12 VDC / 2 A | |
Main parts (image A)
 |
A |
1. Receiver |
2. Sender |
3. Power supply |
4. Infrared transmitter |
5. Infrared receiver |
Safety instructions
WARNING
- Only use the product as described in this manual.
- Only use the provided power supply.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
- Do not immerse the product in water.
- Do not unplug the power supply by pulling on the cable. Always grasp the plug and pull.
- Do not plug or unplug the power supply with wet hands.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Connecting the product (image B)
 |
B |
1. See image B for a connection overview.
2. Insert an HDMI cable into a free HDMI out port of your source device.
3. Insert the other side of the HDMI cable into HDMI In of the sender A1.
4. Insert an Ethernet cable into CAT Out of A1.
5. Insert the other end of the Ethernet cable into CAT In of the receiver A2.
6. Insert the other end of the HDMI cable into a free HDMI in port of your display.
7. Insert an HDMI cable into HDMI Out of A2.
8. Insert the power supply A3 into 12V/DC of either A1 or A2.
- Connect the unit that is most convenient for your setup.
- Only one unit has to be connected to the power outlet. The other unit receives power through the Ethernet cable.
9. Insert the other end of A3 into a power outlet.
Connecting infrared for remote control use
1. Insert the infrared transmitter A4 into IR Out of A2.
2. Insert the infrared receiver A5 into IR In of A1.
3. Try to use the remote of your source device when standing near A1.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
 | This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment. |
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product VREP3470AT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/VREP3470AT#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
