270449 Foam-Snow Fluid Concent
Product Information
Product Name: Foam/Snow Fluid Concentrate
Document ID: 270449_270450_18.07.2023
Product Usage Instructions
- Dilution: This foam/snow fluid concentrate needs to be diluted
before use. The recommended ratio is 1 part concentrate to 4 parts
water. For example, if you have 1 liter of concentrate, add 4
liters of water to achieve the desired mixture. - Mixing: To create the diluted solution, pour the required
amount of concentrate into a container. Then add the appropriate
amount of water gradually while stirring continuously. Ensure that
the solution is well-mixed before use. - Application: Once the diluted solution is prepared, it can be
used in foam or snow machines. Pour the solution into the machine’s
reservoir or container, following the manufacturer’s
instructions. - Machine Settings: Adjust the machine settings according to your
desired foam or snow output. Refer to the machine’s user manual for
specific settings and adjustments. - Operation: Turn on the foam or snow machine and let it run for
a few minutes to establish a consistent output. Monitor the machine
during operation to ensure proper functioning. - Clean-up: After use, flush the machine with clean water to
remove any residue. Follow the cleaning instructions provided by
the machine manufacturer. - Storage: Store the foam/snow fluid concentrate in a cool, dry
place away from direct sunlight and extreme temperatures. Ensure
the container is tightly sealed to prevent leakage or
evaporation.
EN
Foam/snow fluid concentrate
Application instructions · Professional foam/snow fluid concentrate for the creation of short-term, artificial foam and snow effects in the event industry,
theatre and film production. · The products are non-hazardous preparations according to the EU Directive 1907/2006 (REACH). · It is also non-hazardous in accordance with the national and international transportation regulations for land,
sea and air transport. · The contained raw materials are the purest available. · The foam-active substances contained are biodegradable in accordance with the requirements of the Tenside Ordinance
(TensV) to the German Detergents and Cleaning Agents Act. · The containers used are made of first-class PE of the highest quality and can be recycled after they have been completely
emptied. · The product must be used appropriately and in delivery condition. · Store the product frost-proof at between 10° C and 30° C. · The event locations regulations (VStättV) or the corresponding legislations must be observed. · Depending on the local conditions, pre-dilute the product in a ratio of 1:100 to 4:100 (concentrate : water) and then foam
over the machine. · In particular, the foam height must be selected according to the height of the people in the room.
The foam height must not exceed hip height. · The foam height must be dosed to ensure that the exits and emergency exits in closed rooms are always visible. · The same applies to the escape routes lighting and markings, staircases, shafts, slab edges etc. The visibility of 25 m
(max. distance from the next exit acc. to VStättV) must be observed. · Breathing is not possible within the foam! · To prevent anxiety, foamed rooms must never be locked. · Slippery deposits can form during use, especially on slippery floors. · After application, the residual foam solution can be disposed of via the public sewage system. · According to VStättV, only experienced, reliable adults are allowed to operate and maintain technical installations. · Every foamed room must be monitored by instructed persons.
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 270449_270450_18.07.2023
