Sonoff Rf Bridge 433mhz Rf-wifi Bridge Or Gateway Instruction Manual

• In the eWeLink app, tap the “+” button and select “Quick
  Pairing”.
• Follow the prompts on the app to add Wi-Fi devices in pairing
  mode.

• If you fail to enter Quick Pairing Mode (Touch), try Compatible
  Pairing Mode to pair.
• Long press the pairing button for 5 seconds until the Wi-Fi LED
  indicator changes in a cycle of two short flashes and one long
  flash, then release.
• Tap the “+” button and select “Compatible Pairing Mode” on the
  app.
• Select Wi-Fi SSID with ITEAD-****** and enter the password
  12345678.
• Go back to the eWeLink app and tap Next. Wait patiently until
  pairing completes.

• In the eWeLink app, tap the “+” button and select the remote
  controller type.
• A beep sound indicates that the device enters quick pairing
  mode.
• Proceed to operate on the sub-device to pair.
• A double beep sound indicates that the pairing is
  successful.
• Refer to the user manual of the sub-device for pairing
  method.
• The device can add up to 16 sub-devices.

SONOFF TECHNOLOGIES CO., LTD.
Operating Instruction
1. Download “eWeLink”APP eWeLink

English

2. Power on

eWeLink
AndroidTM & iOS
433MHz RF Bridge

After powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.

3. Add Bridge

Add Device
Quick Pairing
WIFI devices can be added in this mo de(make sure the device is in pairing mode).
Scan QR code
GSM devices and devices with QR co de can be added in this mode.

Sound Pairing
Add device in this mode if your devic e support this feature.

Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP. 5

SONOFF TECHNOLOGIES CO., LTD.

English

Compatible Pairing Mode

If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair.
1 Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Long press Pairing button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode.
2 Tap “+” and select “Compatible Pairing Mode ” on APP. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.

Add sub-devices

RF Bridge Added:0
No remote.Please add.
Add

Add Remote Save 1-button 2-button 3-button 4-button Curtain Alarm

Learn Remote
60S left to press the remote button or trigger the sensor
Exit

Tap “+” and select the remote controller type, then a “Beep” indicates that the device enters quick pairing mode. Proceed to operate on the sub-device to pair and “Beep Beep” indicates that the pairing is successful.
Please refer to the user manual of the sub-device for pairing method. The device can add up to 16 sub-devices.

Specifications

Model Input RF Wi-Fi Operating systems Working temperature Material Dimension

RF Bridge/RF BridgeR2 5V 1A 433.92MHz IEEE 802.11 b/g/n 2.4GHz Android & iOS -10~40 RF Bridge: ABS V0/RF BridgeR2: PC V0 62x62x20mm
6

SONOFF TECHNOLOGIES CO., LTD.

Product Introduction

RF LED indicator(Red) Wi-Fi LED indicator(Blue)

433MHz RF Bridge

Input Pairing button

English

The device weight is less than 1 kg. The installation height of less than 2 m is recommended.

LED indicator status instruction

LED indicator status Blue LED flashes (one long and two short) Blue LED flashes quickly Blue LED keeps on Blue LED flashes quickly once Blue LED flashes quickly twice Blue LED flashes quickly three times Red LED flashes quickly

Status instruction Quick Pairing Mode Compatible Pairing Mode (AP) Device is connected successfully Unable to discover the router Connect to the router but fail to connect to Wi-Fi Upgrading Searching and adding …

Features
This is a 433MHz RF bridge with multiple features that allows you to connect a variety of 433MHz wireless devices through switching 433MHz to Wi-Fi. You can set schedules, countdowns, alarm notifications and more.

Remote Control Single/Countdown Timing

Voice Control

Share Control

Sync Status

Alarm notification

Smart Scene

7

Camera Feature

SONOFF TECHNOLOGIES CO., LTD.

English

Factory Reset
Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then the reset is successful. The device enters quick pairing mode (Touch).

Please reset the device to factory defaults if you want to change the Wi-Fi network, then reconnect the new network.
Common Problems
Q: Why my device stays “Offline”? A: The newly added device needs 1 ­ 2mins to connect Wi-Fi and network. If it stays
offline for a long time, please judge these problems by the blue Wi-Fi indicator status:
1. The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi: Maybe you have entered a wrong Wi-Fi password. Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again. The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network. Maybe the MAC address filtering is open. Please turn it off. If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If thenetwork is normal, try to turn off the power to restart the switch.

8