Ct Unite Zk-7921 Wifi 6 Communication Module User Manual

ZK-7921 WiFi 6 Communication Module

Product Information

The ZK-7921 is a WiFi 6 communication module designed by Diao
Pengjun. It can be used with laptops, computers, TVs, and set-top
boxes. The module operates with a minimum distance of 20cm between
the radiator and the user’s body. The model is Wi-Fi 6, 2T2R and
has absolute maximum ratings that define levels at which permanent
damage to the device can occur. The module should not be used or
stored in a corrosive atmosphere, especially where chloride gas,
sulfide gas, acid, alkali, salt, or moisture are present.
Assembling the modules should be done within 6 months, and the
soldering ability should be checked in case of 6 months over.

Product Usage Instructions

To use the ZK-7921, follow these instructions:

  1. Install the module on your laptop device, computer, TV, or
    set-top box.
  2. Ensure that there is a minimum distance of 20cm between the
    radiator and your body while using the device.
  3. Do not use or store the module in a corrosive atmosphere,
    especially where chloride gas, sulfide gas, acid, alkali, salt, or
    moisture are present.
  4. Store the module where the temperature and relative humidity do
    not exceed 5 to 40 and 20 to 60%.
  5. Assemble the modules within 6 months and check the soldering
    ability in case of 6 months over.

USER MANUAL
The information contained herein is the exclusive property of ZK and shall not be distribwritten permission of ZK

Version
Date2022.8.31
MODEL NAME: ZK-7921,ZK-7921AU-TV,ZK-7921US, ZK-7921-M2AE,ZK-7921-DG,ZK-7921-DGX, ZK-7921-PC
PRODUCT NAME : WiFi 6 communication module

DESIGN Diao Pengjun

CHECK

APPROVAL

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME:ZK-7921

DOCUMENT No :
REV.NO : PAGE :

version

Modify a record

Date of update

1. Features
ZK-7921 is the small size and low power module for IEEE 802.11a/b/g/n/ac/axwirelessLAN. ZK-7921 is based on MT7921AUN solution.IEEE802.11a/b/g/n/ac/axDual Band WLAN infrastructure Size : 100.3mmx 50.5mmx 11.5mm 2.4GHz&5GHZ &BT5.2 Support 1024QAM Support 2*2 MU-MIMO,OFDMA Rate up to 1774.5Mbps Operation mode STA,AP,P2P USB2.0*1 Supports drivers for Windows/Linux/Android Security:WPA3,WPA2,WPS2.0,WAPI,WEP,T KIP,CKIP,AES,GCMP,SMS4 · Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB
This equipment could be used on a laptop device, computer, TV and set-top box, but it needs to be installed and operated with minimum distance 20cm between the radiator & your body.

2. Ordering Information

Model ZK-7921

Description Wi-Fi6 , 2T2R

3. Absolute Maximum Ratings

Caution : The specifications in Table 1 define levels at which permanent damage to

the device can occur. Function operation is not guaranteed under these conditions.

Operating at absolute maximum conditions for extend periods can adversely affect the

long-term reliability of the device.

Parameter

Min

Storage Temperature

-10

Max +70

Unit

Storage Humidity (40)

90

%

< Table 1 Absolute Maximum Ratings > . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%.
3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over.

REG.DATE 2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

4. Operating Conditions

Parameter

Operating Temperature

Operating Humidity

Supply Voltage1

VDD

Min

Typ

Max

Unit

-10

70

90

%

5.0

V

5.Standard Test Conditions
The Test for electrical specification shall be performed under the following condition unless otherwise specified.
1). Ambient condition Temperature :25 ± 5
. Humidity:65% ± 5% R.H. 2). Power supply voltages
3.3V (±5%) input power at the Module
3). Current consumption over recommended range of supply voltage and operating conditions is like below. When it’s tested, it must be supplied more than 2 times of maximal current.

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

6. Electrical Specifications

1) DC Characteristics

Current Consumption

Min.

peak

TX Mode ( MCS7)

Idle and Associated state

Typ. 1A 340 160

Max. –

Unit mA

Radio disabled state

20

2) RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified)

Items

Contents

Specification

IEEE802.11b

Mode

DSSS/CCK

Channel frequency

2400 ~ 2483 MHz

Data rate

1,2,5.5,11Mbps

TX Characteristics

Min.

Typ. Max.

Power Level Spectrum Mask

15

17

19

1st side lobes ( to fc ±11MHz) 2nd side lobes ( to fc ±22MHz) Modulation Accuracy (EVM)

-43

-30

-58

-50

30

30

Power On/Off ramp Freq. Tolerance Chip Clock Freq. Tolerance RX Characteristics Minimum Input Level Sens (FER 8%) Maximum Input Level (FER 8%)
* Normal Condition : 25, VDD=3.3.

-15 -15 Min.
-10

0.5 –
Typ. -86

2.0 15 15 Max. -76 –

Unit dBm
dBr dBr
% Usec ppm ppm Unit dBm dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

3) RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified)

Items

Contents

Specification

IEEE802.11g

Mode

OFDM

Channel frequency

2400 ~ 2483 MHz

Data rate

6,9,12,18,24,36,48,54Mbps

TX Characteristics Power Level

Min. 13

Typ. 15

Max. 17

Spectrum Mask

at fc ±11MHz

-32

-20

at fc ±20MHz

-43

-28

at fc ± 30MHz

-48

-40

Constellation Error (EVM)

-34

-28

Freq. Tolerance

-15

15

Chip Clock Freq. Tolerance

-15

15

RX Characteristics

Min.

Typ.

Max.

Minimum Input Level Sens. (PER 10%)

-75

Maximum Input Level (PER 10%)

-20

*Normal Condition : 25, VDD=3.3

Unit dBm
dBr dBr dBr dB ppm ppm Unit dBm dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

REV.NO : PAGE :

4) RF Characteristics for IEEE802.11n ( MCS7 mode unless otherwise specified)

Items

Contents

Specification

IEEE802.11n

Mode

HT20/40

Channel frequency Data rate TX Characteristics Power Level

2400 ~ 2483 MHz

6.5,13,19.5,26,39,52,58.5,65,13.5,2 7,40.5,54,81,108,121.5,135Mbps

Min. Typ. Max. Unit

12

14

16 dBm

Spectrum Mask

at fc ±11MHz

-32

-20

dBr

at fc ±20MHz

-43

-28

dBr

at fc ± 30MHz

-48

-40

dBr

Constellation Error (EVM)

-35

-29

dB

Freq. Tolerance

-15

15

ppm

Chip Clock Freq. Tolerance

-15

15

ppm

RX Characteristics

Min. Typ. Max. Unit

Minimum Input Level Sens.(HT20,PER 10%) –

-73

-66

dBm

Minimum Input Level Sens.(HT40,PER 10%) –

-70

-63

dBm

Maximum Input Level (PER 10%)

-20

dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

5) RF Characteristics for IEEE802.11a ( 54Mbps mode unless otherwise specified)

Items Specification Mode Channel frequency Data rate TX Characteristics Power Level Spectrum Mask at fc ±11MHz at fc ±20MHz at fc ± 30MHz Constellation Error (EVM) Freq. Tolerance Chip Clock Freq. Tolerance RX Characteristics Minimum Input Level Sens. (PER 10%) Maximum Input Level (PER 10%)

Contents

IEEE802.11a – 5GHz OFDM

5150~5650MHz, 5725 ~ 5850 MHz

6,9,12,18,24,36,48,54Mbps Min. Typ. Max. Unit

13

15

17

dBm

-15 -15 Min.
-30

-32 -35 -45 -35 Typ.
-75 –

-20 -28 -40 -28 15 15 Max.
-68 –

dBr dBr dBr dB ppm ppm Unit
dBm dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

6) RF Characteristics for IEEE802.11n ( MCS7 mode unless otherwise specified)

Items

Contents

Specification

IEEE802.11n – 5GHz

Mode

11N HT20/40

Channel frequency

5150~5650MHz, 5725 ~ 5850 MHz

Data rate TX Characteristics

MCS0~MCS7 Min. Typ.

Max. Unit

Power Level Spectrum Mask

12

14

16

dBm

at fc ±11MHz

-32

-20

dBr

at fc ±20MHz

-35

-28

dBr

at fc ± 30MHz

-45

-40

dBr

Constellation Error (EVM)

-35

-29

dB

Freq. Tolerance

-15

15

ppm

Chip Clock Freq. Tolerance

-15

15

ppm

RX Characteristics

Min. Typ. Max. Unit

Minimum Input Level Sens.(HT20,PER 10%) –

-76

-64

dBm

Minimum Input Level Sens.(HT40,PER 10%) –

-73

-61

dBm

Maximum Input Level (PER 10%)

-30

dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

7) RF Characteristics for IEEE802.11ac

DOCUMENT No :
REV.NO : PAGE :

Items

Contents

Specification

IEEE802.11ac – 5GHz

Mode Channel frequency Data rate

HT80 5150~5650MHz,5180~5825 MHz,5725 ~ 5850 MHz MCS0~MCS11

TX Characteristics

Min. Typ. Max. Unit

Power Level

11

13

15

dBm

Spectrum Mask

at fc ±11MHz

-32

-20

dBr

at fc ±20MHz

-35

-28

dBr

at fc ± 30MHz

-45

-40

dBr

Constellation Error (EVM)

-35

-29

dB

Freq. Tolerance

-15

15

ppm

Chip Clock Freq. Tolerance

-15

15

ppm

RX Characteristics

Min. Typ. Max. Unit

Minimum Input Level Sens.(HT80,PER 10%) –

-68

-61

dBm

Maximum Input Level (PER 10%)

-30

dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

8) RF Characteristics for IEEE802.11ax

DOCUMENT No :
REV.NO : PAGE :

Items

Contents

Specification

IEEE802.11ax – 5GHz

Mode Channel frequency Data rate

HT80 5150~5650MHz,5180~5825 MHz,5725 ~ 5850 MHz MCS0~MCS11

TX Characteristics

Min. Typ. Max. Unit

Power Level

11

13

15

dBm

Spectrum Mask

at fc ±11MHz

-32

-20

dBr

at fc ±20MHz

-35

-28

dBr

at fc ± 30MHz

-45

-40

dBr

Constellation Error (EVM)

-35

-29

dB

Freq. Tolerance

-15

15

ppm

Chip Clock Freq. Tolerance

-15

15

ppm

RX Characteristics

Min. Typ. Max. Unit

Minimum Input Level Sens.(HT80,PER 10%) –

-67

-61

dBm

Maximum Input Level (PER 10%)

-30

dBm

REG.DATE :2022.8.31 REV.DATE :2022.8.31

SPECIFICATION MODEL NAME : ZK-7921

DOCUMENT No :
REV.NO : PAGE :

7.Bluetooth Specification
Bluetooth Specification Conditions : VBAT=3.3V ; Temp:25°C

Feature General Specification Bluetooth Standard Host Interface Antenna Reference Frequency Band Number of Channels Modulation RF Specification
Output Power (Class 1.5) Output Power (Class 2) Sensitivity @ BER=0.1% for GFSK (1Mbps) Sensitivity @ BER=0.01% for /4-DQPSK (2Mbps) Sensitivity @ BER=0.01% for 8DPSK (3Mbps)
Maximum Input Level

Description

Bluetooth 5.2 BLE USB /SDIO/UART Small antennas with 0~2 dBi peak gain 2.400 GHz ~ 2483.5 GHz 80 channels FHSS, GFSK, DPSK, DQPSK

Min.

Typical. 10 2 -86

-86

-80
GFSK (1Mbps):-20dBm /4-DQPSK (2Mbps) :-20dBm 8DPSK (3Mbps) :-20dBm

Max.

34.5mm

16.0mm 2.5m2m.0mm

457 ±5mm

17.5mm 3.5mm

12.±0.3mm

3.8mm

7.5mm10.0mm

6.2mm

12.0m m 15.8mm

3.15mm

10.0mm

3.15mm 2.5mm

7.5mm 3.8mm

2.0mm

100.3mm

50.5mm
11.0mm 11.5mm

40mm

20mm

The device supports BT and WIFI functions. It is in conformity with the relevant Union harmonization legislation: Radio Equipment directive: 2014/53/EU. 5G Wifi alerts and restricted country codes The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
CE mark
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals