42057-B Bradley Solar LED Floodlight Spike with RC
Product Information: Bradley Solar LED Floodlight Spike with
RC
The Bradley Solar LED Floodlight Spike with RC is an outdoor
solar-powered light that can be wall-mounted or post-mounted. It
has three lighting modes and an SOS signal flashing mode. The light
needs to charge in full sunlight for 10 to 12 hours when using it
for the first time, and should run for at least 10 days to reach
maximum battery capacity. The solar panel should be placed in a
bright sunny location, free from cover and not in a shaded area.
The LED’s are non-replaceable. The product is made in China for
ZINK and distributed by Cascade Holdings Ltd in the UK.
Installation Instructions:
- When using for the first time, allow the solar light to charge
in full sunlight for 10 to 12 hours. - Position the light in a bright sunny location where it will
receive maximum sunlight, free from cover and not in a shaded
area. - Avoid positioning the light near other light sources such as
street lamps that may cause the solar lights to flicker on and
off. - Assemble the lamp either as a wall mount or post mount.
Lighting Modes:
- MODE1: When a person enters the induction
zone, the light will turn on at the brightest light setting
(100%). - MODE2: If nobody enters the induction area,
the light will be on a dim setting (10%). When a person enters the
induction zone, the light will turn on at the brightest light
setting (100%). - MODE3: The light will be on a dim setting
(10%) and the induction zone is turned off. - SOS: When a person enters the induction zone,
the light will flash an SOS signal.
Warnings:
- The product is suitable for outdoor use only.
- Do not expose the product to direct heat, flames, or immerse it
in water. - Keep out of reach of children and pets.
Cleaning:
If the solar panel gets dirty, the charging capacity will be
reduced. Clean panels occasionally with a soft damp cloth.
Troubleshooting:
- If the night runtime is short, the battery is not fully
charged. Install the solar light in an area where it can receive
the maximum amount of direct sunlight. - If the light does not turn on at night, the location is too
close to other light sources. Relocate the light away from other
light sources.
Disposal:
The Crossed Wheelie Bin symbol on the product means that the
product is classed as Electrical or Electronic equipment and should
not be disposed of with other household or commercial waste at the
end of its useful life. The goods must be disposed of according to
your local council guidelines.
ins ZN 42057 – B
Bradley Solar LED Floodlight Spike with RC
Item ref: 42057 User Manual
· Suitable for OUTDOOR USE ONLY – IP65 rated · Easy to install, no wiring necessary · Recharges batteries using solar energy · Automatically charges in sunlight
Installation
·
When using for the first time, the solar light needs to charge in full sunlight for 10 to 12 hours. Allow the light to run
at least 10 days, charging/discharging to reach the maximum battery capacity.
·
Ensure the light is positioned in a bright sunny location where it will receive maximum sunlight. Ideally, in a position
where it is free from cover and not in a shaded area. Lack of sunlight will affect charge times and operation.
·
Avoid other light sources such as street lamps that may cause the solar lights to flicker on and off.
·
Assembling the lamp:
Wall Mount:
Post Mount:
Page 1
MODE1: When the person enters the induction zone, the light will turn on at the Brightest light setting100%
MODE2: If nobody enters the induction area, the light will be on a dim setting10%; When the person enters the induction zone, the light will turn on at the Brightest light setting100%
MODE3: The light will be on a dim setting10% The induction zone is turned off.
SOS When the person enters the induction zone, SOS signal flashing
Warnings
·
Suitable for OUTDOOR USE ONLY
·
DO NOT expose this product to direct heat, flames or immerse in water.
·
Keep out of reach of children and pets.
·
The LED’s are non-replaceable
·
Please retain this information for future reference.
Cleaning
·
If the solar panel gets dirty the charging capacity will be reduced. Clean panels occasionally with a soft damp cloth.
Troubleshooting
Night runtime is short The battery is not fully charged. Install the solar light in an area where it can receive the maximum amount of direct sunlight.
Light does not turn on at night The location is too close to other light sources. Relocate the light away from other light sources.
Made in China for ZINK, Gorse Mill, Gorse Street, Oldham, OL9 9RJ, U.K. Helpline: 0333 005 0077, Mon-Fri, 9am-5pm.
UK MANUFACTURER / IMPORTER CASCADE HOLDINGS LTD. GORSE MILL GORSE STREET OLDHAM. UNITED KINGDOM OL9 9RJ
EU AUTHORISED REPRESENTATIVE: AUTHORISED REP COMPLIANCE GROUND FLOOR 71 LOWER BAGGOT STREET DUBLIN IRELAND D02 P593
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Page 2
Errors and omissions excepted. Copyright© 2023. Zink
