Tire Lift Roller Manual

Introduction

Thank you for purchasing our tire lift roller. This machine is
of the best quality. In order to operate correctly and prolong the
use time of the machine, please read the instructions of each
operation part of this manual carefully.

Parameter Description

The Tire Lift Roller Model Number and Product Number are
complete to make it easier to provide our technical service and
supply the required parts. For greater clarity and ease of use, we
have provided the data for the tire lift roller frame in the box
below. If there is any inconsistency between the data in this
manual and the data on the sign, the data on the sign shall
prevail.

Description

The machine consists of:

Along Roller
Short Roller
Tire Lift
Control Panel
Support Point
Fair Intake

Note: The red frame area is the edge of the lifting area of the
tire retreading frame. Please make sure that there are no obstacles
in the area. When working, please keep no part of your body from
entering this area to avoid injury.

Overview

Instruction

The design of the tire turning frame is to assist in lifting or
unloading tires with a maximum weight of less than 75kg during the
operation of the tire changer. Do not operate in accordance with
the requirements of the manual. The manufacturer is not responsible
for any damage caused by unreasonable operation not in accordance
with the instructions.

Safety Operation

Tire lifters are for trained professionals only. Changes to the
machine not approved by the manufacturer will not be covered by
warranty. If the user violates the safety rules and disassembles
the safety device of the machine to cause damage, the manufacturer
will immediately stop the safety commitment to the machine.

Shipping

The tire lifter must be shipped in the original factory
packaging and placed in the location indicated on the box. The
packaged machine must be moved by a forklift with the corresponding
lifting capacity, the insertion direction of the trolley is shown
in Figure 3.

Test

Before turning on the machine, determine if the user’s air
supply matches the machine’s requirements. Connect the compressed
air system to the machine through the fitting on the oil water
separator (F) on the side of the case.

Usage Instructions

Step on the pedals to lift up the retreaded tire.
When returning to the original position, the retread frame is
turned back down.

Service and Maintenance

Repairs and maintenance operations should be carried out by
professionals. In order to prolong the service life of the tire
rollover rack, it is necessary to carry out daily maintenance and
maintenance according to the requirements of the manual. If repairs
and maintenance are not carried out regularly, the operation and
reliability of the machine will not be guaranteed, and it may even
cause danger to the operator or people near the machine.

View Fullscreen

Tire lift roller Manual

Content
1Equipment description ·········································································································2 2Summery ·························································································································4
2.1 instruction ················································································································· 4 2.2 safty operation ············································································································ 4 3shiping ··························································································································· 4 4test ································································································································ 5 5Service and maintenance ······································································································ 6 6Pneumatic connection diagram ·······························································································7

introduction
Thank you for purchasing our tire lift roller. This machine has the best quality. In order to operate correctly and prolong the use time of the machine, please be sure to read the instructions of each operation part of this manual carefully Parameter description
The “Tire lift Roller Model Number” and “Product Number” are complete to make it easier to provide our technical service and supply the required parts. For greater clarity and ease of use, we have provided the data for the tire lift roller frame in the box below. If there is any inconsistency between the data in this manual and the data on the sign, the data on the sign shall prevail.
This manual is an integral part of using the machine. Using a tire lift roller Before, read each part of the manual carefully, especially the two parts of operation
safety and machine maintenance
Save this manual for future use!
1

1description

Along roller Bshort roller Ctire lift D ) control panel Esupport point Fair intake

pig 1
2

Dangerous
Pic 2
Note: The red frame area is the edge of the lifting area of the tire retreading frame. Please make sure that there are no obstacles in the area. When working, please keep no part of your body from entering this area to avoid injury. (Figure 2)
3

2overview 2.1 instruction
The design of the tire turning frame is to assist in lifting or unloading tires with a maximum weight of less than 75kg during the operation of the tire changer. Do not operate in accordance with the requirements of the manual.
The manufacturer is not responsible for any damage caused by unreasonable operation not in accordance with the instructions.
2.2 safety operation
Tire lifter are for trained professionals only
Changes to the machine not approved by the manufacturer, the manufacturer is not responsible for any damage caused. If the user violates the safety rules and disassembles the safety device of the
machine to cause damage, the manufacturer will immediately stop the safety commitment to the machine.
3Shipping
Tire lifter must be shipped in original factory packaging, and place it in the location indicated on the box
4

The packaged machine must be moved by a forklift with the corresponding lifting
capacity, the insertion direction of the trolley is shown in Figure 3.
Fig 3 4 Test
Before turning on the machine, determine if the user’s air supply matches the machine’s requirements.
Connect the compressed air system to the machine through the fitting on the oil water separator (F) on the side of the case. See Figure (4)
Adjust
Pic 4
5

Step on the pedals, step down, and turn the retreaded up. When returning to the original position, the retread frame is turned back down

5Service and Maintenance

Repairs and maintenance operations by professionals. In order to prolong the service life of the tire rollover rack, it is necessary to carry out daily maintenance and maintenance according to the requirements of the manual. If repairs and maintenance are not carried out regularly, the operation and
reliability of the machine will not be guaranteed, and it may even cause danger to the operator or people near the machine.
Specially Note: The manufacturer is not responsible for the damage caused by the user’s use of other manufacturers’ parts or due to the disassembly or damage of the safety device

Perform the following maintenance operations every 30 days Control the level of oil in the lubricator. If the level is low, you need to unscrew the oil cup F before adding it. Only use oils of the type specified as ISO HG and with a viscosity of ISO VG32Such as ESSO Febis K32,MOBIL Vacouline 1405,KLUBER32. When turning the hand valve up and down 3-4 times, check whether oil droplets enter the oil cup F. If not, adjust the oil cup screw
noteRetighten the screws on the carriage (D) after 20 days of first use

Feature
Air pressure

Support data
8bar-10bar(145 Psi)
6

Max tire weight Min level sizestandard sizeextend Gross weight
6pneumatic diagram

75kg165lbs 85mm3.35″ 31.5″×25.8″×22.8″800×656×580mm 31.5″×25.4″×43.9″800×645×1115mm 35KG 77.16lbs
Lifting cylinder