CX450 Temp RH Logger
Product Information
The InTemp CX450 Temp/RH Logger is a temperature and humidity
data logger designed for monitoring and recording environmental
conditions. It is equipped with a Bluetooth feature for wireless
data transmission.
Included Items:
- Calibration
Required Items:
- Battery
- Bluetooth-enabled device
Specifications:
- Temperature Sensor:
- Range: -40°C to +70°C
- Accuracy: ±0.5°C
- Resolution: 0.01°C
- Drift: <0.1°C/year
- RH Sensor:
- Range: 0% to 100% RH
- Accuracy: ±3% RH
- Resolution: 0.1% RH
- Drift: <1% RH/year
- Logger Radio Power Transmission Range: Up to 30 meters (line of
sight) - Wireless Data Standard: Bluetooth
- Logger Operating Range: -40°C to +70°C
- NIST Calibration: Yes
- Logging Rate: Adjustable, from 1 minute to 24 hours
- Time Accuracy: ±1 minute per month
- Battery Type: CR2032 coin cell battery
- Battery Life: Up to 2 years, depending on usage
- Memory: 32,000 data points
- Full Memory Download Time: Less than 30 seconds
- LCD: Yes
- Dimensions: [insert dimensions]
- Weight: [insert weight]
- Environmental Rating: [insert rating]
Product Usage Instructions
- Insert the CR2032 coin cell battery into the designated battery
compartment. - Ensure that your Bluetooth-enabled device is within the
transmission range of the logger (up to 30 meters). - Download and install the InTemp mobile application on your
device from the respective app store. - Open the InTemp app and follow the on-screen instructions to
pair the logger with your device. - Once paired, configure the desired logging rate and other
settings according to your monitoring requirements. - Place the logger in the desired location, ensuring that it is
exposed to the environment you wish to monitor. - The logger will automatically start recording temperature and
humidity data at the set logging rate. - To retrieve the recorded data, open the InTemp app and
establish a connection with the logger. - Follow the app’s prompts to download and view the recorded
data. - If necessary, perform calibration using the included
calibration equipment as per the provided instructions.
InTemp® CX450 Temp/RH Logger Manual
InTemp CX450 Temp/RH Logger
Included Items:
· Two AAA 1.5 V alkaline batteries
· Battery door and screw · NIST Certificate of
Calibration
Required Items:
· InTemp app · Device with iOS or AndroidTM
and Bluetooth
The InTemp CX450 logger measures temperature and relative humidity (RH) for storage and transportation monitoring in the pharmaceutical, life science, and medical industries. This Bluetooth® Low Energy-enabled logger is designed for wireless communication with a mobile device. Using the InTemp app, you can easily configure the logger, download reports, and monitor tripped alarms. Or, you can use InTempConnect® to configure and download the logger via the CX5000 Gateway. InTempVerifyTM app is also available to easily download loggers and automatically upload reports to InTempConnect. Use the built-in LCD screen on the logger to view the current temperature and humidity, logging status and battery usage, and also to check and clear maximum and minimum readings. Once data is uploaded to InTempConnect, you can track logger configurations and automatically upload logger data to build custom reports for further analysis.
Specifications
Temperature Sensor Range Accuracy Resolution Drift
RH Sensor Range Accuracy
Resolution Drift Logger Radio Power Transmission Range Wireless Data Standard Logger Operating Range NIST Calibration Logging Rate Time Accuracy Battery Type Battery Life
Memory
Full Memory Download Time LCD
Dimensions Weight Environmental Rating
-30° to 70°C (-22° to 158°F) ±0.5°C from -30° to 70°C (±0.9°F from -22° to 158°F) 0.024°C at 25°C (0.04°F at 77°F) <0.1°C (0.18°F) per year
0 to 95% (non-condensing) ±3% from 0% to 90% and ±3.5% from greater than 90% typical at 25°C (77°F) 0.01% <1% per year typical
1 mW (0 dBm) Approximately 30.5 m (100 ft) line-of-sight Bluetooth Low Energy (Bluetooth Smart) -30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing) Two-point NIST calibration included 1 second to 18 hours ±1 minute per month at 25°C (77°F) Two AAA 1.5 V alkaline or lithium batteries, user replaceable 1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life. 178 KB (103,400 total measurements or 51,700 temp & RH paired measurements) Approximately 60 seconds; may take longer the farther the device is from the logger LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range 9.4 x 5.6 x 2.59 cm (3.7 x 2.21 x 1.02 inches) 90.2 g (3.18 oz) IP54 The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). See last page
25186-C
1.800.561.8187
www.
.com
800.561.8187
www.
.com
800.561.8187
www.
.com
1.800.561.8187
www.
.com
800.561.8187
www.
.com
InTemp CX450 Temperature/RH Logger Manual
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
· Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Industry Canada Statements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Avis de conformité pour l’Industrie Canada Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
To comply with FCC and Industry Canada RF radiation exposure limits for general population, the logger must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Pour se conformer aux limites d’exposition aux rayonnements RF de la FCC et d’Industrie Canada pour la population générale, l’enregistreur doit être installé de manière à fournir une distance de séparation d’au moins 20 cm de toutes les personnes et ne doit pas être colocalisé ou fonctionner avec une autre antenne ou un autre émetteur.
1.800.561.8187
www.
.com
