ETCSM-SB Soundbar Mount
Product Information
Model: ETCSM-SB
Compatibility: Mount is compatible with soundbars featuring
mounting holes spaced between 4.5 and 18 inches apart.
Product Usage Instructions
- Prepare the soundbar by attaching the appropriate hardware
depending on the type of mounting holes:
- (a) For soundbars with threaded holes, install the set
screws. - (b) For soundbars with keyhole slots, insert the Phillips screw
into the large opening and slide it up into the smaller area.
guide the attached screws through the openings in the bracket.
but do NOT completely tighten them.
bolts.
place.
ExplorerTM TV Accessory Soundbar Mount
Assembly Instructions
Model: ETCSM-SB
Included:
Mount is compatible with soundbars featuring mounting holes spaced between 4.5″ and 18″ apart. 1. Prepare the soundbar by attaching the hardware that is appropriate for the type of mounting holes:
(a) For soundbars with threaded holes install the set screws.
(b) For soundbars with keyhole slots, insert the Phillips screw into large opening and slide up into smaller area.
031-11269 Rev .B 12.08.22
2. While the mounting bracket is still separate from the cart, guide the attached screws through openings in the bracket, then secure with wingnuts.
3. Insert the carriage bolts at desired height on the frame, but do NOT completely tighten the bolts.
4. Slide the bracket with soundbar attached over the carriage bolts, then tighten nuts with wrench.
