Vaxcel P0381 Monrovia Mini Pendant Light Instruction Manual (+ PDF)

Contents hide

P0381 Monrovia Mini Pendant Light

Product Information

The product is a ceiling fixture that requires assembly and
installation. It comes with a hardware package that includes an
outlet box house ground wire, mounting strap unit (A), mounting
screw (B), wire connector (C), bolt nut (D), and a canopy coupling
kit. The fixture can be adjusted from 25-1/2 to 67-1/2 by using the
three rods included in the package. It requires a maximum of 100W
medium base bulb (not included) and is recommended for angled or
vaulted ceilings.

Product Usage Instructions

Before starting the installation process, turn off the power at
the fuse or circuit box.
Connect the fixture and socket by the threaded pipe.
Thread the fixture wire through the lower rod, then secure the
lower rod onto the fixture using the threaded pipe. Repeat for
middle and upper rods. Note: use fewer rods if a shorter length is
desired.
Thread the fixture wire through the canopy kit, then secure the
rod assembly to the set threaded pipe of the canopy kit.
Attach the mounting strap unit (A) to the outlet box by using
two mounting screws (B).
Attach the canopy kit to the mounting strap unit (A) by
inserting the fixture mounting screws, then secure it with two bolt
nuts (D).
Attach the glass shade to fixture, then secure it with the
socket ring.
Install a maximum of 100W medium base bulb (not included). See
relamping label at socket area or packaging for maximum wattage
allowed.
For angled or vaulted ceilings, angled mounting is
recommended.
Once the installation is complete, turn on the power at the
fuse or circuit box.

Note: Consult local electrical codes for wiring and grounding
requirements before installing the fixture. Also, keep the
instruction manual for future reference.

View Fullscreen

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

P0381

WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTIONS.

Hardware Package (included):

Outlet Box House Ground Wire

Mounting Strap Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D)
Installation Steps
Turn off the power at fuse or circuit box.
1. Connect the fixture and socket by the threaded pipe.
2. Rod Connections: a. Thread the fixture wire from the fixture through the lower rod, then secure the lower rod onto fixture using the threaded pipe. b. Thread the fixture wire through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe. c. Thread the fixture wire through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe. Note: Length adjustable from 25-1/2″ to 67-1/2″. Use fewer rods if shorter length is desired.

Wire Connector (C) Fixture Wire Green Ground Screw Mounting Strap (A) Lock Nut Fixture Mounting Screw Mounting Screw (B) Fixture Ground Wire Canopy Kit Bolt Nut (D)
Set Threaded Pipe
Upper Rod
Threaded Pipe
Middle Rod
Threaded Pipe
Lower Rod
Threaded Pipe

3. Thread the fixture wire through the canopy kit, then secure the rod assembly to the set threaded pipe of the canopy kit.
4. Attach the mounting strap unit (A) to outlet box by using two mounting screws (B).

Fixture

5. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: —Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source. —Connect theribbed-coated wire (unmarked) from the fixture to the white wire from the power source. —Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the house ground wire with a wire connector (C). Carefully put the wires back into the outlet box.

Threaded Pipe Socket
Glass Shade

6. Attach the canopy kit to the mounting strap unit (A) by inserting the fixture mounting screws, then secure it with two bolt nuts (D).

Socket Ring

7. Attach the glass shade to fixture, then secure it with the socket ring.

Max. 100W Medium Base bulb (not included)

Page 1 / 2

220602

Fig. 1
Support Brace

8. Install 1 X 100W Max. medium base bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed.

9. Angled mounting recommended for a vaulted or angled ceiling.

Outlet Box

(See Fig.1)