Hukoro F30-050959-02h Alfa 9-light Modern Rectangle Lantern Pendant Light Instruction Manual

F30-050959-02h Alfa 9-Light Modern Rectangle Lantern Pendant Light

Product Information

The product is a light fixture that requires assembly and
installation. The package includes hardware such as screws, ball
nuts, stems, mounting unit, canopy, wire nuts, and cover. The
fixture also requires tools for installation such as a ladder,
safety glasses, electrical Phillips, tape, screwdriver, flat blade
screwdriver, pliers, and wire strippers. The product has a
decorative nut and iron racks to hold the fixture.

Product Usage Instructions

1. Unscrew ball nuts A from the mounting unit.
2. Use the mounting screws to attach the mounting unit to the
   junction box.
3. Attach iron rack B onto bracket A using screws.
4. Attach bracket B onto iron rack B using ball nut B.
5. Attach the fixture onto bracket B as shown.
6. Screw stem E into the fixture and attach bracket B into the
   iron rack B and fixture as shown.
7. Adjust arms to proper position.
8. Attach iron rack A onto iron rack B and bracket B using ball
   nuts B as shown.
9. Place the cover onto the iron rack A and secure with decorative
   nut.
10. Install stem connecting the upper and lower ends of the lamp
    body. Install stems (A~D) based on the desired length of the item
    on the fixture, adding canopy one finished.
11. Make the electrical connection from the junction box to the
    fixture. Connect the ground wire to the mounting unit using the
    preinstalled green ground screw. Then, connect the positive,
    negative and ground wires with the supplied wire nuts. Secure with
    electrical tape.
12. Secure the canopy to the mounting unit with the ball nuts
    A.
13. Install bulb (not included).

CAUTION: Before installation, make sure to
remove the fuse at the fuse box.

NOTE: The parts shown in the manual may differ
slightly per light fixture. Sealing tape is not included in the
package.

ASSEMBLY INSTRUCTIONS

CAUTION

³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.

TOOLS REQUIRED

³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.

Ladder

Safety glasses

Electrical Phillips

tape

screwdriver

Flat blade screwdriver

Pliers

Wire strippers

HARDWARE INCLUDED

Fixture

Iron Rack B

Bracket A

Screws

Bracket B

Ball Nuts B

Stem E

Iron Rack A

Cover

Decorative Nut

EXPLODED PARTS

Stems(A~D)

Canopy

Mounting Unit

Ball Nuts A

Mounting Screws

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

INSTALLATION

Wire Nuts

Mounting Unit
Canopy Ball Nuts A
Stem A
Stem B
Stem C
Stem D Decorative Nut
Cover Iron Rack A Ball Nuts B

Wire Nuts Mounting Screws

STEP 1
Unscrew the ball nuts A from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.

Stem E Screws Iron Rack B
Bracket B

Bracket A
Fixture
Bracket B Iron Rack B Screws Ball Nuts B

STEP 2
Attach the iron rack B onto bracket A using screws.

Bulbs (not included)

STEP 3
Attach the bracket B onto

2

iron rack B using ball nut B.

1

ASSEMBLY INSTRUCTIONS INSTALLATION

STEP 4
Attach the fixture onto bracket B as shown.

STEP 5

STEP 6

Screw the stem E into the fixture. Attach the bracket B into the iron rack B

and fixture as shown.

STEP 7
Adjust arms to proper position.

STEP 8
Attach the iron rack A onto the iron rack B
and bracket B using ball nuts B as shown.

STEP 9
Place the cover onto the iron rack A,
then secure with decorative nut.

STEP 10
Install stem connecting the upper and lower ends of the lamp body. Install stems (A~D) based on the desired length of the item on the fixture, adding conopy one finished.

STEP 11
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box

Black wire from the fixture
White wire from the fixture

Bare or Green ground wire from the junction box

Ground wire from the Fixture
*Green Ground Screw

*Sealing tape (not included)
STEP 12
Secure the canopy to the mounting unit with the ball nuts A.

STEP 13
Install bulb (not included)