9602L Type 5-6 Disposable Coverall
Product Information
The Type 5/6 Disposable Coverall is a high-quality product
manufactured by Sealey. It is designed to provide protection and
comfort during various tasks. The coverall is made with a
microporous film that allows breathability, ensuring comfort even
during extended use. The coverall is available in two sizes: Large
(Model No: 9602L) and Extra Large (Model No: 9602XL). It features
elasticated wrists, ankles, hood, and waist section for a secure
fit. The coverall weighs 65gsm, providing a lightweight and
comfortable wearing experience.
Product Usage Instructions
- Before using the coverall, consult with qualified safety
personnel to ensure that the coverall type and rating offer
adequate protection for your intended use. - The coverall is suitable for single-use only and should not be
re-used. - When using the coverall with other personal protective
equipment (PPE), such as gloves, boots, and respiratory protection,
ensure that all openings like wrists, ankles, and neck are securely
taped to comply with EN requirements for Type 5/6 garments. - The user should judge the suitability of the coverall for the
type of protection required and select the correct combinations of
coverall accessories and ancillary equipment. - If the coverall becomes contaminated, worn, or damaged, it
should be promptly removed and disposed of properly. - Before wearing the coverall, always check its integrity to
ensure it is in good condition. - In very warm conditions, consider the possibility of heat
stress. Use appropriate undergarments and ventilation equipment to
reduce or eliminate heat stress. - Avoid extreme heat and cold as they may affect the performance
of the coverall. - The coverall should not be used in situations where there is a
risk from hazardous chemicals that have not been tested against.
Refer to the physical performance of the coverall in relation to
Type 5 and 6 testing. - Ensure that compatible chemical resistant gloves, boots, and
respiratory protection are worn along with the coverall. The gloves
should cover the elastic cuffs and allow unrestricted movement for
the intended task. - If you need further advice or assistance, please contact the
manufacturer or distributor. - It is recommended to use the product within 3 years from the
date of manufacture/production written on the packaging.
TYPE 5/6 DISPOSABLE COVERALL LARGE / EXTRA LARGE MODEL NO:9602L / 9602XL
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
See Specification Section for Labelling
Refer to instruction
manual
1. SAFETY
WARNING: Suitable for single-use only. DO NOT re-use. WARNING: A properly selected coverall is essential to protect your health. Before commencing any task, please consult with qualified safety
personnel to ensure that the coverall type and rating offers adequate protection for your intended use. WARNING: For use only by trained and qualified personnel. WARNING: Restrictions on the coverall disposal depend solely on the contamination occurring during use. 9 When using the coverall with other PPE and in order to comply fully with EN requirement for Type5/6 garments, all openings such as
wrist, ankles, neck etc., should be securely taped. 9 The user shall be the sole judge of the suitability for the type of protection required and the correct combinations of coveralls accessories
and ancillary equipment. 9 Upon contamination, wear or damage, the coverall should be removed and appropriately disposed of at the earliest opportunity. 9 The wearer should always ensure to check the integrity of the coverall before wearing it. 9 The possibility of heat stress should be considered in very warm conditions. Heat stress can be reduced or eliminated by the appropriate
use of undergarments and ventilation equipment. 9 Extreme of heat and cold may adversely affect the performance of this garment. 9 The coverall should not be used where there is a risk to certain hazardous chemicals that have not been tested against. Although limited
protection can be offered from various chemicals, please refer to the physical performance of the coverall in relation to Type 5 and 6 testing. 9 The user must also wear compatible chemical resistant gloves, boots and respiratory protection. The gloves should cover the elastic
cuffs. An appropriate size should be selected by the user to allow for unrestricted movement for the intended task. 9 If necessary please contact Manufacturer/Distributor for advice. 9 It is recommended that the product be used within a period of 3 years from the date of manufacture/production written on the packaging.
2. INTRODUCTION
Microporous film makes the coverall breathable, ensuring comfort during periods of extended use. Elasticated wrists, ankles, hood and waist section. 65gsm Microporous film.
3. SPECIFICATION
Model No:………………………………………………9602L, 9602XL Size 9602L Large (Chest/Height): ………. 100-108/176-182cm Size 9602XL – Extra Large (Chest/Height):108-116/182-188cm Fabric Physical Properties
Abrasion Resistance
EN 530 Meth.2
Flex Cracking Resistance
ISO 7854 B
Trapezoidal Tear Resist. MD
ISO 9073·4
XD
Puncture resistance
EN863
Tensile Strength MD
ISO 13934-1
XD
Radioactive Protection
EN1073-2:2002
Infective Resistance(solid particles}
ISO 22612
Resistance to ignition
EN 13274-4
Fabric Chemical Properties Test Method
Penetration
Resistance to chemical EN 368
Sulphuric acid 30%
Class 3
Sodium Hydroxide 10%
Class 3
Class Class 1 Class 4 Class 2 Class 2 Class 1 Class 1 Class 1 Class 2 Class 3 Pass Repellency
Class 3 Class 3
© Jack Sealey Limited
Original Language Version
9602L 9602XL Issue:3 31/03/23
o-Xylene Butance-1-ol Whole Suit Test Performance Type 5 Inward leakage Method as defined by EN ISO 13982-1:2004 Type 6 Light spray Method as defined by EN 13034:1005 En 14126:1003 Barrier to infective agents En 1073-2:002 Barrier to radioactive particulates EN 1149-5:2018 Anti-static Protection against Infective Agents EN14126 ISO 16603 ISO 16604 EN ISO 22610 ISO 22611 ISO 22612
Class 3 Class 3
Class 3 Class 3
IL 82/90 30% &TILS 8/1015% Pass
Pass
Pass
Pass Pass
CLASS 6 CLASS 6 CLASS 6 CLASS 6 CLASS 6
Approvals: Shirley®,Notified Body2895 Port Tunnel Business Park,Office 13 Unit 21, Dublin 17, ROI, Ireland. BTTG®,notified body 0338, Unit 6 Wheel Forge Way, Trafford Park, Manchester,M17 EH, United Kingdom.
4. STORAGE
9 The coverall can be stored in accordance with normal storage practices in a dry environment away from sources of heat, light and direct sunlight.
ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR PURCHASE HERE
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
9602L 9602XL Issue:3 31/03/23
Sealey - Leading Professional Tool & Workshop Equipment Supplier
