SP-5116 Automatic Watch
Product Information
The Automatic Marlborough Limited Edition timepiece is a
self-winding Mechanical Automatic watch that does not require a
battery. It is powered by the motions of the user’s own wrist
during the wear of the watch, and it can also be manually wound.
The watch is equipped with a screw-down crown to ensure water
resistance. It has a uni-directional turning bezel and a date
display. The watch is recommended to be worn for at least 8 hours
each day to ensure it is fully wound.
Product Usage Instructions
Using the Screw-Down Crown
The screw-down crown should not be pulled unless it is unscrewed
first. To unscrew the crown, turn it anti-clockwise until it turns
freely without tension. Gently pull the crown out to the desired
position for watch setting. To screw the crown back in, push the
crown all the way in towards the watch and turn it clockwise until
it is securely screwed down. Failure to securely screw down the
crown after setting the watch may affect its water resistance.
Winding the Mainspring
Before using the watch, it is recommended to manually wind the
mainspring to start it moving. To wind the mainspring:
- Unscrew the crown by turning it anti-clockwise to position
[1]. - Turn the crown clockwise to wind. Wind 15-20 times and it will
start to move naturally after shaking slightly. - Push the crown in then screw it securely.
This watch must be worn for at least 8 hours each day to ensure
it is fully wound. Winding the watch by the crown will put power on
the spring but not enough to allow the watch to function fully. If
the watch stops overnight or loses time, it means it is not being
fully wound.
Setting the Time
To set the correct time:
- Unscrew the crown and pull it out to position [3] (2nd
click). - Turn the crown clockwise to set the correct time.
- Push the crown in then screw it securely.
Setting the Date
To set the date:
- Unscrew the crown and pull it out to position [2] (1st
click). - Turn the crown clockwise to set the correct date.
- Push the crown in then screw it securely.
If the watch has stopped running after a period of not wearing
it, gently move the watch side to side 20 to 30 times to move the
rotor or gently turn the crown 5 to 10 times to get the second hand
running at its normal speed. If the watch is running smoothly, do
not wind the crown to avoid overwinding the movement. Provided the
watch is worn frequently, it should have sufficient power to
operate without any fuss.
AUTOMATIC
This timepiece is equipped with a self-winding Mechanical Automatic movement. It does not need a battery.
It is powered by the motions of the user’s own wrist during the wear of the watch. You may also choose to wind the watch manually.
For more details on operating this timepiece please refer to
the enclosed booklet or visit:
spinnaker-watches.com
A U TO M AT I C MARLBOROUGH LIMITED EDITION
Instruction Manual
For more infomation Pour plus d’informations Para más información Per maggiori informazioni Für mehr Informationen
Vol. 1.116 EN
HOUR HAND
SECOND HAND
A
U
500F T/150M
TO M AT I C
E 24 JEW
L S
MINUTE HAND
SCREWDOWN CROWN
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN
Screw-down Crown
Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down (Position [0] is secured. Positions [1],[2] and [3] are not secured for water resistance ). Do NOT unscrew your crown while you are in any environment where moisture is present.
DATE
(1st click) (2nd click)
UNI-DIRECTIONAL TURNING BEZEL
01 2
3
CLOSED:
OPENED:
SECURELY SCREWED
NOT SECURED
AND WATER RESISTANT FOR WATER RESISTANCE
1
USING THE SCREW-DOWN CROWN
Do NOT pull the crown unless it is UNSCREWED first:
TO UNSCREW: Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out
0
to the other desired positions for watch setting
(see specific operating
instructions on the
following pages).
TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down.
1
NOTE: Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.
2
Before you use this watch, It is recommended that you manually wind the mainspring to start it moving.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM.
WINDING THE MAINSPRING
1. Unscrew the crown by turning it anti-clockwise.
0
2. When it is in position [1], turn
the crown clockwise to wind.
Wind 15-20 times and it will
1
start to move naturally after shaking slightly.
3. Push the crown in then screw it securely.
3
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound.
IMPORTANT NOTE
1. If your watch is running smoothly, please do not wind the crown to avoid overwinding the movement. Provided you are wearing the watch frequently, your watch should have sufficient power to operate without any fuss.
2. If your watch has stopped running after a period of not wearing the watch, gently move the watch side to side 20 to 30 times to move the rotor or gently turn the crown 5 to 10 times to get the second hand run at its normal speed. 4
HOW TO SET THE TIME
1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
0
0 23
0
3
5
HOW TO SET THE DATE
1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown in then screw it securely.
HOW TO CHANGE THE BRACELET TO STRAP
1.
2.
0
2
0
* Do not set the date between 9:00 P.M. and
4:00 A.M.
6
7
3.
4.
Strap Changing end
5.
8
9
HOW TO USE A DEPLOYANT CLASP
2 1
HOW TO RESIZE METAL BRACELET
On the inside of the bracelet, you will see some small arrows engraved on removeable links.
1.
1. Flip the cover.
2. Press the buttons
2.
on the clasp sides.
10
11
3.
5.
Nylon Head Hammer
6. 4.
12
13
WATER RESISTANCE
7.
Note that the water resistance chart serves
only as a guide (please refer to the water
resistance chart on the next page). Actual
water resistance may vary depending on a
number of factors including water tempera-
ture, water salinity and use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and use of your timepiece under adverse conditions.
8.
Nylon Head
Hammer
Always remember to employ the screw down crown if available to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
Finish
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch.
This may cause condensation inside your
watch, which may affect and damage the
14
inner workings of your watch.
WATER RESISTANCE 50M/ 150M/ 200M/ 300M/ 500M/
CHART
5ATM 15ATM 20ATM 30ATM 50ATM
SPLASH/ SHOWERING
SWIMMING/ BATHING
BRIEF SWIMMING/ WATER SPORTS
PROLONGED SWIMMING/ FREE DIVING
SCUBA DIVING
PROFESSIONAL DEEP SEA DIVING
