SP-5113 Automatic Watch
Product Information: Automatic Watch
This timepiece is equipped with a self-winding Mechanical
Automatic movement, which means it does not need a battery and is
powered by the motions of the user’s own wrist during the wear of
the watch. The watch can also be manually wound. The screw-down
crown ensures water resistance, and you should always be certain
that the crown is securely screwed down. The watch has an hour
hand, second hand, minute hand, and a date function.
Screw-Down Crown
The screw-down crown is used to ensure water resistance, and you
should always ensure that the crown is securely screwed down.
Positions [1], [2], and [3] are not secured for water resistance.
Do NOT unscrew your crown while you are in any environment where
moisture is present.
Using the Screw-Down Crown
Do NOT pull the crown unless it is UNSCREWED first. To unscrew,
turn the crown anti-clockwise until it turns freely without
tension. Gently pull the crown out to the desired positions for
watch setting. To screw, push the crown ALL THE WAY IN towards the
watch and then turn clockwise until it is securely screwed
down.
Winding the Mainspring
Before using this watch, it is recommended that you manually
wind the mainspring to start it moving. To wind, unscrew the crown
by turning it anti-clockwise. When it is in position [1], turn the
crown clockwise to wind. Wind 5-10 times, and it will start to move
naturally after shaking slightly. Push the crown in then screw it
securely.
This watch MUST be worn for at least 8 (Eight) hours each day to
ensure it is fully wound. An automatic watch will only wind when
the watch is on your wrist and your arm moves. Winding the watch by
the crown will put power on the spring but not enough to allow the
watch to function fully. If your watch stops overnight or loses
time, it means it is not being fully wound.
How to Set the Time and Date
To set the time, unscrew the crown and pull it out to position
[3]-(2nd click). Turn the crown clockwise to set the correct time.
Push the crown in then screw it securely. To set the date, unscrew
the crown and pull it out to position [2]-(1st click). Turn the
crown anti-clockwise to set the correct date. Push the crown in
then screw it securely.
Changing the Bracelet to NATO Strap
The user manual does not provide instructions on how to change
the bracelet to NATO strap.
AUTOMATIC
This timepiece is equipped with a self-winding Mechanical Automatic movement. It does not need a battery.
It is powered by the motions of the user’s own wrist during the wear of the watch. You may also choose to wind the watch manually.
For more details on operating this timepiece please refer to
the enclosed booklet or visit:
spinnaker-watches.com
Instruction Manual
Vol. 1.113 EN
HOUR HAND
SECOND HAND
MINUTE HAND
SCREWDOWN CROWN
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN
Screw-down Crown
Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down (Position [0] is secured. Positions [1],[2] and [3] are not secured for water resistance ). Do NOT unscrew your crown while you are in any environment where moisture is present.
(1st click) (2nd click)
DATE
01 2
3
CLOSED:
OPENED:
SECURELY SCREWED
NOT SECURED
AND WATER RESISTANT FOR WATER RESISTANCE
1
USING THE SCREW-DOWN CROWN
Do NOT pull the crown unless it is UNSCREWED first:
TO UNSCREW: Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out
to the other desired
0
positions for watch setting
(see specific operating
instructions on the
following pages).
TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down.
1
NOTE: Failure to SECURELY screw down the
crown after setting the watch may affect its
water resistance.
2
Before you use this watch, It is recommended that you manually wind the mainspring to start it moving.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM.
WINDING THE MAINSPRING
1. Unscrew the crown by turning it anti-clockwise.
0
2. When it is in position [1], turn
the crown clockwise to wind.
Wind 5-10 times and it will
1
start to move naturally after
shaking slightly.
3. Push the crown in then screw it securely.
3
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound.
IMPORTANT NOTE
1. If your watch is running smoothly, please do not wind the crown to avoid overwinding the movement. Provided you are wearing the watch frequently, your watch should have sufficient power to operate without any fuss.
2. If your watch has stopped running after a period of not wearing the watch, gently move the watch side to side 20 to 30 times to move the rotor or gently turn the crown 5 to 10 times to get the second hand run at its normal speed.
4
HOW TO SET THE TIME
1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
0
0 23
0 3
5
HOW TO SET THE DATE
1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown in then screw it securely.
HOW TO CHANGE THE BRACELET TO NATO STRAP
Strap Changing end
1.
2.
0
0 2
0
* Do not set the date between 9:00 P.M. and
4:00 A.M.
6
7
3.
5.
6.
8.
7.
9.
4.
8
9
WATER RESISTANCE
Note that the water resistance chart serves only as a guide (please refer to the water resistance chart on the next page). Actual water resistance may vary depending on a number of factors including water temperature, water salinity and use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and use of your timepiece under adverse conditions.
Always remember to employ the screw down crown if available to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch.
This may cause condensation inside your
watch, which may affect and damage the
10
inner workings of your watch.
WATER RESISTANCE 50M/ 100M/ 200M/ 500M/ 1000M/
CHART
5ATM 10ATM 20ATM 50ATM 100ATM
SPLASH/ SHOWERING
SWIMMING/ BATHING
BRIEF SWIMMING/ WATER SPORTS
PROLONGED SWIMMING/ FREE DIVING
SCUBA DIVING
PROFESSIONAL DEEP SEA DIVING
