XH-610 ANC Bluetooth Headset
XH-610 ANC Headset
The XH-610 ANC Headset is a wireless Bluetooth headphone that
allows you to adjust the volume, switch songs up and down, and turn
ANC on/off. It has an operating distance of 10 meters and a working
time of 40 hours. The headset can be charged with a Type C charger
cable and has a 3.7V 500MAH battery that takes 2 hours to fully
charge. It also comes with an AUX cable that requires a voltage
alimentacion of 5Vcc=1A.
To Adjust Volume:
- Volume Down: Long press – button
- Volume Up: Long press + button
To Switch Songs Up and Down:
- Previous Song: Short press – button
- Next Song: Short press + button
To Turn ANC On/Off:
Hold down the function button for 4 seconds until the
alternating red and blue lights flash.
To Charge Battery:
Before the first use, the battery must be fully charged. Insert
the charger into the power switch and the charging indicator light
will show red. When fully charged, the light will turn off.
To Turn On/Off:
To turn on, hold down the power on function button for about 4
seconds until the alternating red and blue lights flash. To turn
off, hold down the power on function button for about 4 seconds
until it is closed.
To Pair with Mobile Phones:
- Volume Up: Long press + button
- Next Song: Short press + button
- Switch Button: Long press 4 to turn it on/off
- Volume Down: Long press – button
- Previous Song: Short press – button
- ANC On/Off
Open the headphone and hold down the function button for 4
seconds until the red and blue lights flash. Set the phone to
search for Bluetooth devices. When the phone finds the headphone,
select it from the list. If the pairing is successful, the light
will flash blue.
To Answer, Hang Up, and Redial:
- Incoming Calls: Short press the button one time
- Hang Up: Short press the call button one time
- Redial: Press the button twice quickly
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
To adjust the Volume
1 . Volume down: long press – button 2.Volume up: long press + the button
To switch song up and down
1 .Previous song : short press the – button 2 . Next song: short press the + button
To ON/OFF ANC
Press the · button to open the noise cancelling function , the LED light green , press again to off the noise cancelling fuction , the LED light turn off .
XH- 6 1 0
ANC Headset
Bluetooth Version: JL5 . 3 Drive unit: Ø 4 0 mm Impedance: 3 2 ± 1 5 NRR: 1 8 dB- 2 2 dB
Operating distance: 1 0 M Working hours: 4 0 hours Charger cable : Type C
Battery: 3 . 7 V 5 0 0MAH Charge time : 2 hours
With AUX cable Voltage alimentacion : 5 Vcc= 1 A
Sensitivity: 1 0 3 ± 5 dB at1 KHz, 6 mW Frequency respond: 2 0 Hz~ 2 0 KHz
To Charge Battery
Before the first use of bluetooth headphone battery must be full of first. Insert the charger into the power switch The charging indicator light shows red ,when fully charged ,light turn off .
ON/OFF switch machine
Boot: hold down the power on function button for about 4 seconds,until the alternating red and blue. To turn it off: hold down power on function button about 4 seconds,until closed.
To pair with mobile phones ,connection
1 Volume up: long press + the button Next song: short press + the button
2 Switch button: Long press 4″ turn it off/ on
3 Volume down: long press – button Previous song : short press the – button
4 ANC ON/OFF
Open the headphone . hold down the function button 4 seconds to red and blue lights flashing . Set the phone to search for bluetooth devices.
about
When the phone search to headpnone,search to the list to determine the headphone. 4. If the match is not sucessfull ,repeated operation .
5. If the pairing is successful ,will flash blue lights .
3 To Answer,hang up and Redial
4
1. Incoming calls: short press the button one time. 2. Hang up: short press the call button one time . 3. Redial:press the button twice quickly
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
