Canarmna Ich2013b05bny Easton 5 Light Brushed Nickel Candle Style Chandelier Instructions

ICH2013B05BNY Easton 5 Light Brushed Nickel Candle Style Chandelier

Product Information: Chandelier

The ICH2013B05 05/22 chandelier is a decorative lighting fixture
that adds elegance to any room. It comes with a swivel sleeve rod,
fixture B, star washer, cap, nut, finial, shade frame, bulb
spinner, and mounting bracket assembly. The product requires a
Phillips screwdriver, wire cutters, pliers, wrench, and wiring
supplies as required by the local electrical code for
installation.

Product Usage Instructions

Important Safety Instructions

• Read all instructions carefully before proceeding with the
  installation
• Turn off electrical power before starting installation of the
  light fixture
• This product must be installed in accordance with the
  applicable installation code by a person familiar with the
  construction and operation of the product and the hazards
  involved
• Connect the ground wires (bare copper or green) from your
  fixture to the ground wire (bare copper or green) or ground screw
  in the electrical box
• To clean the fixture, turn off the power, wait for it to cool,
  and wipe the fixture with a clean, soft cloth

Installation

1. Install the length of rod that is required by threading wire
   through the rod and screwing it to the fixture. Install swivel to
   the rod, ensuring that the sleeve is at the swivel.
2. Loosen B. Adjust stud to desired length and lock in place with
   B.
3. Mount the mounting bracket to electrical box using electrical
   box screws (not included). Make sure the studs on the mounting
   bracket are facing out from the electrical box.
4. Connect the ground wires (bare copper or green) from your
   fixture to the ground wire (bare copper or green) or ground screw
   in the electrical box. Connect the black wire (or wire with
   marking) from the fixture to the black wire in the electrical box
   and connect the white wire from the fixture to the white wire in
   the electrical box.
5. Once connections of wires are completed, carefully tuck wires
   and wire nuts into the electrical box making sure no bare wire (on
   the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly.
   Secure fixture in place with star washers and cap nuts.
7. Remove the spinner nut from socket. Position the frame onto the
   socket and secure it with the spinner nut.
8. Install specified bulb type and wattage (not included).
9. Position the shade onto the frame and secure it with the
   finial.

Note: The product may not look exactly as shown in figures. For
any further assistance, please contact us at Tel: (613) 342-5424 or
Fax: (800) 263-4598.

CHANDELIER

ICH2013B05 05/22

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED:

!

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

Phillips Screwdriver

Wire Cutters

Wiring supplies as required by local electrical
code

Pliers

Wrench

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION:
Swivel Sleeve Rod
Fixture “B”

1. Install the length of rod
that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the sleeve is at the swivel.

House supply Ground wire

Fixture Ground wire

Black White

Fixture

Stud

2. Loosen “B”. Adjust stud to

Star Washer

Cap

desired length and lock in place

Nut

with “B”

4. Connect the ground wires
(bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once connections of wires are
completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on
mounting bracket assembly. Secure fixture in place with star washers and cap nuts.

Studs

Electrical Mounting

Box

Bracket

3. Mount the mounting
bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.

Finial
Shade
Frame Bulb Spinner
Nut

7. Remove the spinner nut from
socket. Position the frame onto the socket and secure it with the spinner nut.
8. Install specified bulb type and
wattage (not included).
9. Position the shade onto the
frame and secure it with the finial.

Electrical Box Screws (not included)

Tel: (613) 342-5424, Fax: (800) 263-4598