24BK550Y IPS Multi-Tasking Monitor
Product Information
The user manual provides instructions for the disassembly of LG
products to remove components and materials requiring selective
treatment. The product identification includes the type of product,
which is a monitor, and the model names are 24BK550Y, 27BK550Y,
24BK55YP, and 27BK55YP. The contents of the manual include
materials and components for selective treatment, tools required
for disassembly, and the product disassembly process. The materials
and components for selective treatment include printed circuit
boards (PCB), batteries, mercury-containing components, liquid
crystal displays (LCD) with a surface greater than 100 square cm,
and more. The tools required for disassembly include a screwdriver,
nipper, and plastic Hera jig.
Product Usage Instructions
When storing and transporting displays, they must be stored in a
weatherproof manner in containers with covers. The batteries can
easily be removed from the remote control or PCB assembly once the
back cover of the product has been removed. To disassemble the
product, first remove the back cover of the display by hand and
screwdriver. This will expose the accessible electronic units
(PCBs), which can now be easily removed with hand and screwdriver.
The LCD module (together with their casing) is only left after all
other parts like electronic units and casing have been removed. The
power cord plugged into the back of the display can easily be
removed by hand or cables are provided as de-attached from the
product. Capacitors/condensers that measure greater than 2.5 cm in
diameter or height can be removed using a nipper.
Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment.
Product Identification
Type of Product Monitor
Model name
24BK550Y, 27BK550Y, 24BK55YP, 27BK55YP
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays.
Contents
1. Materials and components for Selective Treatment 2. Tools Required 3. Product Disassembly Process 4. Disassembly of External enclosure
1. Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Materials and components
Notes
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
Batteries
Mercury containing components
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm
Capacitors / condensers (Containing PCB / PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height
External electric cables cords
Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances
With a surface greater than 10 square cm For Remote control Internal batteries display backlights Includes background illuminated displays with gas discharge lamps
Power cord Signal cable
Quantity of items included in product
O –
O
–
O O O –
2. Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Tool Description
Tool information
Screw driver
Nipper
Plastic Hera Jig
3. Product Disassembly Process
1. Batteries
Batteries can easily be removed from the remote control once the back cover of the remote control has been removed. None
Batteries can easily be removed from the PCB Assembly once the back cover of product has been removed. None
3. Product Disassembly Process
2. PCBs and LCD Module
The back cover of the display can easily be removed by hand and screw driver.
Once removed this will expose the accessible electronic units (PCBs),
which can now be easily removed with hand and screw driver.
LCD module(together with their casing) is only left after all other parts like electronic units and casing have been removed.
3. Product Disassembly Process
3. Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product
4. Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by nipper
4. Disassembly of External enclosure
Unscrew the stand base by using coin
Push button and lift the stand body and remove the screw(4EA)
Overturn the set and disassemble the latches of three edges
4. Disassembly of External enclosure
Disassemble the back cover
Re-overturn the set and disaaemble screw 4EA and disassemble the PCB
LCD Module
