Acoustic Audio Home Theater Surround 5.1 Speaker System
Specifications
- Item Weight: 37 pounds
- Product Dimensions: 8.9 x 3.8 x 12.3 inches
- Item model number: HD516
- Speaker Type: In-Wall
- Recommended Uses For Product: Home Theater
- Mounting Type: Wall Mount
Descriptions
This in-wall/ceiling speaker system by Acoustic Audio by Goldwood is 5.1 high definition Series HD516. Two rectangular front in-wall HD speakers, two rounded rear in-ceiling HD speakers, one dedicated True Center channel in-wall HD speaker, and one 10″ HD speaker make up this system, which is ideally paired “a built-in HD subwoofer. The best entertainment bundle for creating a custom home theatre surround sound system. The speakers don’t take up valuable shelf or floor space because they install flush into any wall or ceiling.
Each speaker has been engineered to deliver the greatest possible sound. The entire system has genuine 6.5-inch speakers that can handle 1, 850 watts of power “titanium tweeters, butyl rubber surrounds, and Kevlar cones. The Quick-turn mounting arms on the speakers make installation simple. The white grills can be painted to match a particular style of decoration. There is speaker cord included. The subwoofer included in this set is not amplified. Use of this subwoofer requires an external amplifier.
How to use?
You must run the cords for in-wall speakers across your amp area after going up or down the wall. You will run the cords to your amp and along the ceiling for in-ceiling speakers. It is preferable to utilize a wall plate to decorate wherever the cables exit in your amplifier location.
Features
- Acoustic Audio by Goldwood HD516 six-piece house speaker two-way system, 20-300w per speaker, 8ohm, 6.5″ Woven fiber bulletproof woofers, 2 HD-650 wall speakers, 30hz-22 kHz, 98dB, and 2 HD-6 ceiling speakers.
- Butyl rubber surrounds, titanium tweeters that can rotate, Low profile housings, round cutout 7.875″, overall 9″, depth 3.25, rectangular cutout 7.375″ X 10.75″, overall 8.875″ X 12.25″, and
- HDS10 wall passive Sub speaker, 20-300 watts, 26hz-200hz, 10″ Woofer, cut out is 10.625″ X 10.625″, overall is 12″ X 12″, depth is 3.75″, This passive Sub requires a Ws1005 Sub amplifier.
- HD-6c wall center channel 3-way speaker, 20-350 watts, 33hz-22 kHz, two 6.5″ Woofers, 12mm soft dome tweeter, cut out is 19.25″
- Use for multiple room systems, surround sound, in-wall or in-ceiling home entertainment, A complete set of six in-wall and in-ceiling speakers is included in this listing and price.
Warranty and Support
You can get in touch with the manufacturer directly or find out more information on their website if you’d want a copy of the warranty for a product you saw on Amazon.com. Manufacturers’ warranties might not always be applicable, depending on things like how the product is used, where it was bought, and who sold it to you. If you have any issues, please read the guarantee, and then get in touch with the seller.
Frequently Asked Questions
A solitary voice coil.
They do indeed have white push-in grills. If you stand directly in front of the speaker, you can see the yellow speaker through the grill.
No wires are present.
They supplied two cables with tiny connection ends. They keep moving. Speakers for automobiles typically employ such connection type. search for automobile speakers.
You must use the necessary tools to make holes in your ceiling. Speaker wire and the rest of the package are included. On my setup, I chose to utilise wire that was bigger in gauge. I think the wire was a #16.
A separate amp would be required for each passive subwoofer.
These speakers have been in place for a while. Yes, regular speaker wire can be used to connect your subwoofer amp to the in-wall subwoofer if they are still being sold.
I believe it to be of worse quality because you can still see the yellow through the mesh cover (but also lower price)
You’re right; this is a speakers-only format.
Via an audio system
No, you require speaker wire, however you may attach the amp by adding banana connections to one end. It must be linked to your receiver’s sub amp input with its own amplifier. If you have a second amp built in, you won’t need a separate amp for it.
Yes, a subwoofer amplifier is necessary. look up “WS1005”
Yes, you can, however usually the front speakers are rectangular and the surround speakers are in the ceiling.
Yes. Mine are suspended from the basement ceiling. The audio is fantastic. I keep picking up new words and noises from movies I’ve seen a hundred times. Excellent speakers
Yes, the submarine fires immediately. The newbie is considered when designing these speakers. really simple to install No need for directional baffles or trick boxes.
