Watteco Inclin’o Remote Monitoring User Guide

WATTECO Inclin’O Remote Monitoring

Start

Provision the device on your LoRaWAN® network with the keys available on The secure platform.

ON

OFF

Video :
ON – OFF

Installation Setting up

Default: double-sided pads

Double-sided pads

Finish cleaning the surfaces to be bonded with the 3M wipe supplied with the sensor. Place the double-sided pads (supplied with the sensor) on the back of the case. Place the case in position, press down hard (~10kg)

• Rotate the 2 small covers of the housing to screw in the 2 magnets, inserting the lock washer under the screw head. Make sure the metallic surface is flat and clean.

Rotate the 2 small covers on the enclosure to screw the collar brackets to the enclosure, inserting the lock washer under the screw head Pass the clamp through the slots in the clamp holder and around the post. Then tighten the clamp firmly.

Radio propagation

Avoiding obstacles for better radio propagation.

Check the radio coverage with the Netw’O.

Characteristics

SITE SUPPORT
https://support.watteco.com/

CERTIFICATIONS

Watco represented by JC LE BLEIS declares that the radio equipment type 50-70-201 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/

References

• support.watteco.com/
• Download Center - WATTECO
• Concepteur et fabricant de capteurs transmetteurs radio connectés IoT - WATTECO
• Centre de téléchargement - WATTECO