realme Buds Wireless 2 Neo
User Guide
1
Enter pairing mode
Separate two earbuds, then press the multi-function button for 3s.
2
Connect earbuds
Turn on Bluetooth on smartphone, connect to realme Buds Wireless 2 Neo
Press: Play/pause, answer/hang up calls
Double press: Next song, reject calls
Triple press: Gaming mode
Press and hold for 1s: Siri/voice assistant
Press and hold for 3s: Pairing
Press and hold for 10s: Restore factory settings
Use with realme Link
Users can download realme Link to install firmware updates and additional features for their realme Buds Wireless 2 Neo.
Packaging List
Earphone
S/L, M (On earphone by default)
Type-C charging cable
User guide
Basic Parameters
Model: RMA2011
Working Frequency: 2.402GHz-2.480GHz
Max Power Rate: ≤ 8dBm (for Europe)
USB type-C input: DC 
5.0V, 500mA
Temperature description
The headset shall be used under the environment with 0 C~45 C temperature and 45%~85% humidity, and the storage temperature shall be -20 C~35 C,The headset shall be charged at 0 C~45 C. The headset will be affected, and even the headset and battery may be damaged in case of too high or too low temperature when charging.
Realme Chongqing Mobile Telecommunications Corp., Ltd.
No.178 Yulong Avenue, Yufengshan, Yubei District,Chongqing, China
REV.1.0 
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Hereby, Realme Chongqing Mobile Telecommunications Corp., Ltd.
declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at www.realme.com/global/-sup-port/eu-declaration
Caution risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Due to the used enclosure material, the earphone shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
– This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID :2AUYFRMA2011
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.Or changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Recycling Initiative
At realme we understand that our responsibility doesn’t end at selling you our products. realme has been working in the area of safe disposal of electronic waste. Since mobiles, tablets and other electronic items are made of hazardous constituents. Under the Guidelines of Ministry of Environment, Forest and Climate Change, Government of India, E-waste (Management) Rule, 2016 and Amendment E-waste Rule 2018.
realme will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products. realme will comply with all the applicable laws related to E-waste management.
For more information on safe disposal, recycling and you may log on to https://www.realme.com/in/legal/e-waste-management or write an email to [email protected] or contact our Toll Free No. 1800-102-2777
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.
WARRANTY
Thank you for purchasing realme products. If any manufacturing defect problems occur within 12 months from the date of purchase, user can enjoy our company’s warranty service.
Matters Needing Attention:
- When you buy the product, the sales unit will issue a valid proof of purchase.
- The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
- If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the realme customer service center for free maintenance during the warranty period.
Non-warranty situation:
This warranty does not cover the following cases:
- Out of warranty period.
- Damage caused by use not in accordance with the instructions.
- Damage caused by man-made causes.
- Failure caused by unauthorized disassembly, maintenance, or modification of the product.
- Damage caused by force majeure factors (such as floods, earthquakes,lightning, etc.).
- There is no warranty card, invoice, or warranty card that does not match the invoice information.
- The product wears naturally.
- Other failures and damages that are not caused by the quality of the product itself.
Website: www.realme.com
WARRANTY CARD (Stub Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product. so that we can provide better services to you.
User Information
User’s name__________________________
Phone Number_______________________
Address_____________________________
Email______________________________
Product Information
Product Model_______________________
Product Serial Number_________________
Sales Information
Purchase Date_______________________
Invoice Number_____________________
Sales Unit__________________________
Phone Number_____________________
Address___________________________
WARRANTY CARD (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product. so that we can provide better services to you.
User Information
User’s name___________________________
Phone Number________________________
Address______________________________
Email________________________________
Product Information
Product Model___________________________
Product Serial Number_____________________
Sales Information
Purchase Date___________________________
Invoice Number_________________________
Sales Unit______________________________
Phone Number_________________________
Address_______________________________
realme (Global) - Dare to Leap
