Make It Real 1420 Crystal Suncatcher Owner's Manual

INSTRUCTIONSGo to makeitrealplay.com
for video instructions!

CONTAINS

	5 metal rings
	9 curb chains
	1 clear elastic cord 3 m (3.28 yds)
	3 heart gem pendants
	1 moon gem pend
	17 jump rings
	2 diamond pendant charms
	1 metallic cord 3 m (3.28 yds)
	20 round sequins
	2 sun charms
	4 moon gem beads
	68 various beads
	4 star shaped beads
	1 Play Tray

You will need

LEGEND

	Scissor
	Ruler
	Adhesive tape
	Knot
	Craft glue
	Let dry
	Double knot
	Repeat
	Clear nail polish

READ THE INSTRUCTIONS ALL THE WAY TO THE END BEFORE STARTING YOUR PROJECT. HAVE FUN!

Install the Play Tray by taping it to a flat surface as shown.
Ask an adult for permission before taping the surface.

Measure and cut three pieces of 1 m (1.09 yd) of elastic cord.

WRAPPING THE SMALL RING

1. Select the small ring.
   
2. Double knot the metallic cord around the ring, leaving 8 cm (3 in) at the end.
   
3. Apply one drop of nail polish or glue to the knot and allow to dry for 5 minutes.
   
4. Using your finger to stabilize the double knot, tightly wrap the thread around the ring as you wrap, including the 8 cm end piece.
   
5. Wrap to your desired completion.
   
6. A. Finish the wrap off by wrapping the metallic cord around one finger and the ring 4 times.
   B. Pass the metallic cord through the loops you made with your finger and the ring.
   
7. Apply a drop of clear nail polish or glue to the end of the cord and allow to dry for 5 minutes.
   Cut the remaining metallic cord.
   

BEAD WRAPPING THE MEDIUM RING

1. Select the medium ring.
   
2. Double knot the jelly cord around the ring, leaving 8 cm (3 in) at the end.
   
3. Apply a drop of glue or clear nail polish to the Knot and allow to dry for 9 minutes.
   
4. Using the play tray, organize 25 beads in your preferred order or reference the bead order below. Thread your bead selection onto the jelly cord.
   
5. A. Double knot the end of the beaced jelly cord to the ring where the beads end.
   B. Add a drop of glue or nail polish to the knot and allow to dry 5 minutes.
   
6. Using the remaining length of jelly cord, wrap between each bead, securing the beaded cord to the ring. Adjust the placement of the end of the beaded jelly cord to fit the beads along the ring.
   
7. Finish the wrap by tying a double knot on the remaining 8 cm (3 in) from the beginning of the jelly cord.
   
8. Add a drop of glue or clear nail polish to the knot and allow to dry for 5 minutes. Gut the remaining jelly cord.
   

SEQUIN AND BEAD WRAPPING THE LARGE RING AND ATTACHING THE CHAINS

1. A. Tie a secure double knot with the jelly cord around the large ring, leaving 8 cm (3 in).
   B. Apply a drop of glue or clear nail polish to the knot and allow to dry for 5 minutes.
   
2. Using the Play Tray, organize 20 beads of your choice or reference the bead order below.
   
3. Tie a double knot to the ring at the end of the threaded beads.
   
4. Add a drop of glue or clear nail polish to the knot and allow to dry for 5 minutes.
   
5. Wrap the remaining jelly cord around one bead, thread a sequin, and the first jump ring from the sun chain assembly onto the jelly cord and wrap it, securing it to the ring.
6. A. Wrap one bead and thread one sequin, then add the end of the long chain.
   B. Wrapping the beads and threading the sequins & times until you reach the center.
   
7. Add the center jump ring from the sun chain assembly and the end of the chain attached to the smail and extra small rings.
8. Continue wrapping the beads and threading the sequins / more times, then thread the remaining end of the long chain.
   
9. Wrap one bead and thread one sequin, then thread the last jump ring of the sun chain assembly.
   
10. Wrap the last bead and thread the last sequin, then finish wrapping the large ring by tying a double knot on the extra jelly cord left from the beginning.
11. Add a drop of glue or clear nail polish to the knot and allow ta dry for 5 minutes. Cut the remaining jelly cord.
    

CREATE YOUR HANGING ATTACHMENT

1. Fold the remaining jelly cord in half.
2. A. Pass the two ends of the cord through the top hole of the diamond pendant charm.
   B. Pass the ends of the cord through the halfway loop and pull on them until they are tight around the pendant loop.
   
3. A. Using the Play Tray, organize the remaining beads in your desired order or follow the example below.
   B. Thread the beads onto the cord.
   
4. A. Take the extra small ring and tie a tight jeweler’s knot around it, securing it to the hanging attachment.
   
5. Add glue or clear nail polish to the knot, allow to dry for 5 minutes, Gut the excess jelly cord and hang.
   

WARNING!
CHOKING HAZARD —small parts. Not suitable for children under 3 years.
STARANGUALTION HAZAD Functional Long Cord – Adult supervision required.
CAUTION: This toy contains functional sharp points.

MAKE IT REAL
1700 Reisterstown Ro Ste 211 Pikesville MO 27208 USA 470-995-3685
Justin House, 24 Hood St, An coats Urban Village, Manchester, M4 GWA UK +44 (0) 67 302 4400

Made in China

makeitrealplay.com