Morvat Mor-bwpr-a Heavy Duty Water Pressure Regulator With Gauge Instructions

MORVAT MOR-BWPR-A Heavy Duty Water Pressure Regulator with Gauge Instructions

Inductions

1. Step 1
   The RV Regulator’s upstream side will connect directly to the water source.
2. Step 2
   The downstream side will connect to your water filter which will then connect to your RV.
   
3. Step 3
   Open up all faucets in the 1W to ) flush the system, and expel any air remaining in the pipes. Keep faucets open until Step 6.
   
   
4. Step 4
   Ensure there is a shut-off in the off position between the regulator and the RV. This is important to ensure pressure remains safe while calibrating the PSI.
   
5. Step 5
   Turn on the water supply and use the included screwdriver to adjust the gauge to the desired PSI level. (40 to 50 PSI is ideal for many RVs)
   
6. Step 6
   Open the shut-off valve and allow the now regulated after to enter the RV’s water pipes. Wait until the faucets have a smooth flow of water, without air. You can then turn off your faucets and double-check that the gauge is set to the correct PSI level.