LPD7 Series Dimmable LED Panel Light
Product Information
The product is a dimmable LED panel light with the model number
LPD7-40K24-50. It belongs to the LPD7 series.
- Operating Temperature: Check product label for specific
electrical specifications related to installation. - IP Rating: IP20
- Safety and Notes: The manufacturer does not assume
responsibility. A safety cable is not included, but it is
recommended that one be connected to the grid clip during
installation. - Recommended Accessories: None specified.
Product Usage Instructions
Drop Ceiling Installation:
- Turn off the supply power to the circuit. If installing as a
retrofit, remove the existing fixture. - Open the driver box and remove the knockout(s) for wiring. Make
electrical connections using the wiring diagram provided. Once
complete, resecure the driver box cover. - For each safety tab, firmly bend the tab to be vertical and
then bend the upper portion out 90 degrees. - Lay the fixture into the T-grid.
Note: The tabs should secure the light in the T-grid while still
allowing for the reinstallation of adjacent ceiling tiles.
User Manual
Important: Read all instructions prior to installation.
Dimmable LED Panel Light
LPD7-40K24-50
Specifications
Model Operating Temperature IP Rating
LPD7-xK22-40
Check product label for specific electrical specifications related to installation. Improper installation will void warranty.
LPD7 Series
Safety and Notes
· Product should be installed by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
· To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
· Avoid looking directly into the light when illuminated. · Failure to properly support the fixture may result in damage or injury, for which
the manufacturer does not assume responsibility. A safety cable is not included, but it is recommended that one be connected to grid clip during installation.
Recommended Accessories
· 010 V Slide Dimmer (F019) · 010 V Knob Dimmer (A019)
LPD7-xK24-50 14°95° F (-10°35° C)
IP20
LPD7-xK24-72
Wiring
Neutral (white) Line (black)
Ground (green)
Dim- (gray) Dim+ (purple)
Rev Date: V1 09/15/2022 4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
User Manual
Important: Read all instructions prior to installation.
Dimmable LED Panel Light
Drop Ceiling Installation
1. Turn supply power to circuit off. If installing as a retrofit, remove existing fixture. 2. Open driver box and remove knockout(s) for wiring. Make electrical connections
using wiring diagram. Once complete, resecure driver box cover.
FIG 1
Firmly bend Safety Tabs up and out
Safety Tab
LPD7 Series
3. For each safety tab, bend tab to be vertical, then bend upper portion out 90 degrees.
4. Lay fixture into T-grid.
FIG 2
T-Grid
Fixture
Safety Tab
Driver Box
Note: Tabs should secure light in
T-grid while still allowing reinstallation of adjacent ceiling tiles.
Rev Date: V1 09/15/2022 4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
