Jianyuanda Mirror 63533 Led Makeup Mirror Qi Wireless Charger Instruction Manual

63533 LED Makeup Mirror QI Wireless Charger

Product Information:

The LED Makeup Mirror QI Wireless Charger is a versatile device
that combines a mirror with built-in lights and a wireless charging
pad. It also features a USB charging port for charging other
devices.

Charging the Mirror:

1. Connect the micro USB port to a 5V/2A power supply or computer
   using the provided USB cable.
2. During charging, the indicator light will be red.
3. When the mirror is fully charged, the indicator light will turn
   blue.
4. Before charging, ensure that the lights are turned off.

Using the Mirror Lights:

1. Touch the on/off switch to turn the lights on or off.
2. Long press the touch sensor on/off switch to adjust the
   brightness of the lights.

Using the QI Wireless Charger:

1. Connect the micro USB port to a 5V/2A power supply (adapter not
   included).
2. The indicator light will be red, indicating that the QI
   wireless charger function is active.
3. The indicator light will turn blue when a QI wireless charge
   phone or USB device is detected.
4. If no phone or device is detected, the QI wireless charger
   function will automatically turn off after 20 seconds.
5. If a non-QI wireless charge phone or USB device is placed on
   the charging base, the indicator light will flash green.
6. Ensure that the phone is placed in the middle of the charging
   base when using the QI wireless charger function.

Using the USB Charging Port:

To charge a phone or USB device using the USB port, the micro
USB port of the mirror needs to be connected to a power supply.

FCC Warning Statement:

The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located for operating in conjunction with any
other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.

How to charge the mirror?
1. Connect the micro USB port with a 5V/2A power
supply or computer by the provided USB cable.
2. When we start charging, the indicator is red color.
When the mirror is fully charged, the indicator light become blue color. 3 . Before charging the mirror, please make sure the lights are off.
Instructions:
· It takes around 4 hours to charge the mirror fully by using 5V/2A power supply. It takes more hours if use computer to charge the mirror.

,

.

J @c

..J

–

I

LED Makeup Mirror QI Wireless charger

How to use the mirror lights?
1. Touch the on/off switch to turn on or turn off the
lights.
2. Long press the touch sensor on/off switch to adjust
the brightness of lights.
USB charging port ldlcator Light
I
r.:-0
I
!
on/off switch·-‘

QI wireless charger base
indicator light

How to charge the mirror?
1. Connect the micro USB port with 5V/2A power
supply(adaptor excluded), the indicator light is red and QI wireless charger function starts to work.
2. The indicator will become blue color once it detect
the QI wireless charge phones or other USB device. 3 . The QI wireless charger function will turn off
automatically in 20 seconds if it does not detect the phone or other device.
4. If we put non-QI wireless charge phone or USB
device on the charging base, the indictor is green light flash.
S. When we use the QI wireless charger function, make
sure the phone in the middle of the charging base.
6. When we use the USB port to charge our phone or
USB device, the micro USB port need to connect with power supply.

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
This device complies wth Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.